ASTM centrifuge tube, cylindrical, with conical base, borosilicate glass 3.3
Product number:
9315820
Manufacturer:
H. & K. Starke GmbH
Packaging information:
Length:
218 mm
Width:
45 mm
Height:
55 mm
Weight:
0.063 kg
Description
Cylindrical, with conical base. Graduations and labelling in high-contrast blue enamel. Maximum loading 700 xg rcf. Internal diam. neck approx. 17 mm.
Properties
| Height: | 167 mm |
|---|---|
| Manufacturer Article Number: | 710 0044 |
| Material: | Boro 3.3 |
| Max. rcf: | 700 x·g |
| Neck int. Ø: | 17 mm |
| Nominal capacity: | 100 ml |
| Standard: | ASTM D 96 |
| UNSPSC: | 41-12-17-03 |
Skip product gallery
From
CHF 66.50*
Other customers also bought
H. & K. Starke GmbH
H. & K. Starke GmbH
ASTM centrifuge tube, pear-shaped with cylindrical base, borosilicate glass 3.3
Pear-shaped with cylindrical base. Former standard ASTM D 96. Capacity 100ml. Graduations and labelling in high-contrast blue enamel. Maximum loading 700xg rcf. Internal diam. neck approx. 17 mm.
Skip product gallery
LLG-Centrifuge tubes economy, PP
From
CHF 122.00*
Centrifuge tubes, round bottom, AR glass®, ungraduated
From
CHF 0.30*
Centrifuge tubes Nalgene™ Oak Ridge, PPCO, with sealing caps, PP
From
CHF 15.40*
Centrifuge tubes, round bottom, DURAN®
From
CHF 6.30*
Eppendorf Tubes® 5.0 mL, PP, with hinged lid
From
CHF 50.80*
LLG-Microcentrifuge tubes, PP, with Safe-Lock lid
From
CHF 24.00*
Centrifuge bottles Nalgene™, PP-copolymer
From
CHF 16.30*
Test and Centrifuge Tubes Falcon®, PS and PP, with graduation
From
CHF 169.40*
Centrifuge tubes, PP
From
CHF 11.10*
Similar products
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
Maximum loading: 3500 x g rcf. Smooth rim, wall thickness: 2.0 mm.
Transparent. For use up to 50,000 x g in cooled and uncooled centrifuges (Cat. no. 9.315685 can be used up to 100,605 x g). PP sealing caps with silicone seal for additional leak protection when centrifugation at >10,000 x g or when centrifugation of hazardous substances.Round bottomGood mechanical strengthHigher chemical resistance than polycarbonateMultiple autoclavableLeak-proof
To DIN 58970 part 2. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.Maximum loading: 4000xg rcf.* Not to DIN.
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedHinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 80 °CFrom 80 °C on, please use tube clips (cat. no. 9.409 294)
Tip
LLG-Microcentrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-freeTemperature range -86 up to 121 °C
PP-copolymer with PP screw cap. Autoclavable.
Widely used and referenced in laboratory protocols.Round bottomDual position snap-cap, PE for easy handling as indicatedSterile, pyrogen-free (<0.1 EU/ ml)
Polypropylene tubes with very good thermal, mechanical and chemical stability. Fitted with screw-on closure. Packed in boxes or bags. With graduations and labelling area. Tubes are sterile, cytotoxicity-free, DNase/RNase- and human DNA-free.