-
Product groups
- Campaigns
- New products
- Stock clearance sale
- General laboratory consumables
- Occupational safety, Security
- Heating and cooling technology
- Liquid Handling
- Analytical measurement and testing
- Optical instruments and Microscopes
- Sample preparation
- Cleaning and sterilisation
- Stirring, Shaking, Mixing
- Cleanroom
- Vacuum technology, Drying, Dry storage
- Distillation, separation, filtration
- Environmental-, soil-, water-, food analysis
- Chromatography
- Life Sciences
- TPP
Filter
–
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP Clipmax
TPP Clipmax is a combination of cell culture bottle 10cm2 with removable media chamber and a standard microscope object carrier (25 x 75mm) with surface-activated growth surface. Cells can be bred directly to Clipmax. A cell transfer is not necessary before microscopy. Clipmax is excellent for cell culture, immunocytochemistry and a variety of microscopic applications.
Quality features of Clipmax:
• Crystal clear plastic object carrier
• Surface activation for demanding cells
• Suitable for coloring, also immune fluorescence
• Resistant to solvents (e.g. acetone, aethanol, xylol)
• Stackable unit
Dimensions outside: 93 x 33 x 32 mm
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP PCV cell measuring tube
The PCV cell measuring tube allows a quick and reproducible measurement of the cell mass. The method is ideal for monitoring cell growth (cell mass).
If many parameters are optimized in a production process, many samples are incurred at the same time. Here the rapid evaluation with the PCV cell measuring tube and the simple reading process with "Easy Read" is the method of choice.
A short centrifuging (1 minute at 2,500 g) is enough to pellet the cells into the calibrated capillary. There, the volume of the cell pellet with the "Easy Read" measuring instrument can be read.
Quality features of the PCV cell measurement tube:
PCV tube with calibrated capillary, partly with volume grade
fits in microcentrifug
The determination of the cell number or cell density is one of the routine tasks in any cell culture laboratory. The established procedure of manual cell number determination using a hämacytometer (Neubauer counting chamber) is very time-consuming and the result is affected with an error of around 15 %.
The volume measurement with the PCV cell measuring tube is a quick, simple, reproducible and much more precise alternative to manual cell count. It enables the "Packed Cell Volume" (PCV) in a cell suspension; You get an absolute value that correlates with other parameters (e.g. protein content, cell number, metabolic activity ...).
The PCV cell measurement tubes are easy to use and - in contrast to automated methods - do not require any special instruction or complex device.
TPP is the Swiss manufacturer for cell culture.
Cell culture bottles, cell culture test panels, cell culture shells, centrifugugen tube, filtration units, serological pipettes, cryor tubes and vacuum filtration systems are part of the TPP range.
TPP is always one step ahead and offers additional features and ergonomically outstanding accessory products such as cell scrapers, cell spades or racks.
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP "Easy Read" measuring instrument
Einfaches Ablesen des Pelletvolumens in den PCV Zellmessröhrchen mit dem von TPP entwickelten Spezialmessgerät "easy read".
Material: ALU
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP adapter panels made of aluminum
TPP adapter panels made of aluminum for the shakers of the brands Kühner and Infors.
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP Tubespin® Bioreactor
Bioreactor for cell culture in the laboratory - sterile - easy to use.
Cell culture vessel/bioreactor for all suspension cells. Unimagined flexibility for the user. Exclosure, change of medium, parallel experiments etc. make these tubes easy. The Tubespin® Bioreactor 15 fits into a standard 15 ml-centrifugugure rotor, the Tubespin® bioreactor 50 in a standard 50 ml center-central rotor and the Tubespin® bioreactor 600 in many 1000 ml rotors. The Tubespin® Bioreactor 50 with septum is for robot -controlled applications. It has a septal insert with a cross slot in the screw cap with additional openings Oberhalt of a gas-permeable PTFE filter for a sterile oxygen supply and a barcode on each tube.
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP serological pipettes
TPP serological pipettes belong in every cell culture laboratory and in any security bank.
TPP serological pipettes meet all the requirements of a one -off pipette. A easily readable bidirectional graduation enables the fluid amount to be read or descending. Colored cotton plates simplify identification. The appropriate color codes are also attached to the stackable TPP dispatchers in order to prevent confusion in routine processes. The reservoir (enlargement) at the end of the 25 ml and 50 ml pipettes increases their volume capacity. The extremely small outer diameter on the pipe enables an accessibility of these large pipets even in smaller cell culture bottles. Both pipets are produced in the specially developed form process, which allows an endotoxin value of <0.1 EU/ml to guarantee. TPP pipettes are pyrogen -free, not cytotoxic, not hemolytically and individually packed in blister packaging.
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP cell scrapers and cell spatula
Gentle and comprehensive harvesting your cell culture.
The cell scraps and cell spatula have the above knobs on the handle and thus enable improved and safe gripping with rubber gloves. All auxiliary devices serve the gentle scraping and harvesting of cells in the accessible cell culture products. The blade can be rotated with the cells. The cell scraps and cell spatulas are delivered in blister packaging and in the user-friendly TPP dispenser box
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP cell culture shells
TPP cell culture shells enable easy handling and safe handling of their cell cultures.
Cell culture shells made of PS. At the cell culture shell there is a side side. This grip ring simplifies the specific separation of the lower part of the cell culture shell. The stacking behavior is also exceptional. Several cell culture shells stacked on top of each other can be transported by A to B, secured by the stacking edge. The cam inside of the shell cover works as a distance holder to the shell. In this way, constant ventilation is achieved. A surface treatment of the growth zone developed by TPP guarantees optimal results. The crystal -clear transparency enables visual control with penetration with several stacked cell culture shells.
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP cell culture test panels
The TPP cell culture test plates provide safe handling of their cell cultures.
TPP cell culture test panels made of PS are characterized by the following properties:
Ventilation system in the lid
Growth zone only in the dumplings
A corner of the lid is slightly rounded off, so the lid can only be placed on the test plate in a certain position.
Alphanumeric coordination of the calottes, black embedded.
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
Cell culture tube for cell culture in the laboratory
TPP cell culture tube 20 and cell culture flat tube 10
An innovation from TPP is this unique cell culture flat tube 10: optimized growth area, flattened upper side to eliminate light fraction, tube suitable for standard 50 ml adapter, PTFE filter screw cover with 22 µm pore size.
The cell culture tube does not roll away thanks to the specially shaped screw cap. At the length of 50 mm, the tube is growth.
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP screw cap (thread cap) for TPP cell culture bottles
TPP Vent and filter screw cap for TPP cell culture bottles.
For the closure of your cell culture bottles with or without air supply.
Depending on your cells, you can select the correct cap for you. TPP meets the different requirements of the cell cultures.
Material: PE
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP Cell culture bottles with reinforced lid or ripening film
Cell culture bottles from TPP - the safe handling of their cell cultures. The reversible lid can be opened several times and closed again. This mechanism enables access from above into the cell culture bottle without movement restriction. Stacking the cell culture bottles is possible with TPP cell culture bottles 150cm². The cell culture bottle has proven itself with a ripening film made of multi -layered foil material. The film is deducted before accessing the bottle. Reding is not possible.
TPP90153 and TPP90653:
TPP cell culture bottle with an optimized opening shape; The design of the cell culture bottle with a ripening film has been further developed and to the version TPP90153 resp. TPP90653 improved. The new opening form and the enlarged sprinkling bottle result in improved sprinkling behavior.
TPP Techno Plastic Products AG
TPP Techno Plastic Products AG
TPP cell culture bottles
Cell culture bottles from TPP - the safe handling of your cell culture. The yellow original is not only characterized by the specific shape, which guarantees a stable, non -slip stacking behavior of several bottles, but also by the optically appealing labeling option. Label fields are attached on both sides, an advantage not only for left -handed people. Guaranteed accessibility of TPP pipettes and scraps to the corners are further features of the TPP cell culture bottles. The uniform and growth -promoting surface treatment of the growth area as well as the crystal clear transparency rounded off the high quality profile of the product.