Accessories for LLG-Vacuum desiccators "Heavy Duty"
Product number:
9042773
Manufacturer:
LLG Labware
Packaging information:
Length:
318 mm
Width:
480 mm
Height:
55 mm
Weight:
0.001 kg
Description
Properties
| Description: | Drying Agent Tray for VDR-30 Series |
|---|---|
| Manufacturer Article Number: | 9042773 |
Skip product gallery
Desiccator Nalgene™, Type 5311, PC
From
CHF 192.70*
Desiccators, plastic, vacuum, PC/PP
From
CHF 88.30*
Desiccator plates, PP
From
CHF 13.50*
LLG-Vacuum desiccators, polycarbonate, round form, "Heavy Duty", with vacuum gauge
From
CHF 489.30*
Sample transport box DURAPorter™, PC
From
CHF 149.00*
Vacuum desiccators, PP / PC
From
CHF 193.90*
Desiccators Nalgene™, Type 5309, 5310, PC, blue
From
CHF 152.60*
Desiccators, PP/PC
From
CHF 236.00*
Similar products
Transparent, lightweight, unbreakable, for vacuum or non-vacuum use. With stopcock. Large, stable base. No danger of implosion. Capable of maintaining 0.95 bar negative pressure over a 24 hour period. With silicone O-ring, no lubrication required. Suitable for 230 mm diameter desiccator discs or plates. Max. height over plate 195 mm. Suitable for vacuum hoses with an inner diameter of 6 to 10 mm.Plate not included.
Crystal clear, PC dome lid. PP. Lower section and desiccant tray. Venting stopper with non-return valve in lid. Polychlorbutadiene rubber (CK) O-ring seal between lid and base which is compressed when vacuum is applied. Lightweight and easy to use.
PP. For use at room temperature. Not suitable for use with hot crucibles.
Cost effective alternative to glass desiccators. Highly transparent, lightweight, shatterproof, made of polycarbonate.Silicon O-ring and specially designed 'locking clip' allows use without grease and ensures an airtight seal. Flange lock holds the bottom and the lid together during non-vacuum conditions. Three-way stopcock provides great convenience for consistent vacuum draw, vacuum release or gas exchange e.g. inert gas. Maximum vacuum of 1.3 mbar (1.3 x 10-4 MPa) for more than 72 hours. Wide base provides superior stability. Hose connection outer diam. 9.5 mm.Also available in brown with UV-blocking effect for light sensitive samples.Scope of supply: Drying agent tray, perforated sample tray, O-ring and flange locker
Ideal for transporting biological and clinical samples, as well as instruments and products that you want to keep clean and dry under testing environmental conditions. Are light weight and easy to carry; they are ideal for moving samples that must be protected from humidity, dust and other environmental influence. The clarity of the DURAPorter™ enables the user to visibly check sample integrity, so that it can be opened using the right precautions.Polycarbonate construction are available in three colours for use/owner identificationSilicone water-tight seal and three lid clasps provide secure closureCarry handle folds neatly into body space allowing the units to be stackedLid opens a full 180°, allowing total access to contents and making it easier to cleanWill accommodate 13 and 16 mm tubes in a 72-place one rack®, or similar sized/brand of rackUse the separators provided to create your own compartment sizes, or use empty to transport larger products and equipmentAutoclavableMatching rack (e.g. Cat. No. 9.193 997, 9.193 998) please order separately. Further colours available on request.
This lightweight plastic vacuum desiccator holds a full vacuum of 760 mm Hg at room temperature for 24 hours.Polycarbonate lid with large ribbed buttonWhite PP baseIncl. 0.32 cm thick perforated plateConical polypropylene valve with PTFE cone, for hoses with 6.4 - 9.5 mm I.D.With neoprene O-ring, for sealing up to 0 °C without grease
Transparent PC bell and blue PP lower part. Will not break or implode under vacuum provided that the operating instructions are obeyed. Lower part is resistant to diluted acids, alkalis and other common desiccants. Vacuum connection at lower part. TFE stopcock is suitable for vacuum tubing 6.4mm i.d. For air tight sealing it is sufficient to grease sealing surface a little. No additional sealing ring is necessary. The additional rim at the bell prevents grease stains on lab benches.
Lower portion can be filled with desiccants. The materials to be dried are placed on a perforated disc made of PP. The lid is sealed with a neoprene gasket. Ideal for use in educational laboratories. Also available with stopcock for evacuation.