Augendusche Aqua Push
CHF 266.17*
Content:
1
Delivery according to order confirmation
Product number:
6494206
Manufacturer:
EKASTU Safety GmbH
Packaging information:
Description
Die EKASTU-Augendusche Aqua Push ist ideal geeignet für ein schnelles und effektives Spülen, im Rahmen der Erste-Hilfe Versorgung, nach einem Augenunfall
- Speziell, ergonomisch geformter Brausekopf, gefertigt aus hochwertigem Medizinmaterial
- Aqua Push liefert einen breitstrahlenden und gleichmäßigen Wasserstrahl (ca. 7,2 l/min)
- Einfach zu bedienender Handgriff aus robustem Kunststoff
- Staubschutzdeckel
- EKASTU-Aqua Push entspricht der Produktnorm DIN EN 15154-2
- Inklusive leicht zu reinigendem, flexiblem Brauseschlauch mit Knickschutz und genormtem ½ Zoll (ISO 228) Anschluss
- Kinderleichte Inbetriebnahme durch simples anschließen an die lokale Kalt-/Trinkwasserleitung
- Ideal für die Wandmontage geeignet, Wandhalterung im Lieferumfang enthalten
- Selbstklebendes Hinweisschild für die normgerechte Kennzeichnung der Augendusche
Properties
| Colour: | Black |
|---|---|
| Connection size: | 1/2“ |
| Manufacturer Article Number: | 177500 |
| Material: | HDPE |
| Mounting: | Wand |
| No. of spray heads: | 1 |
| Standard: | DIN EN 15154-2 |
| Type: | Aqua Push |
Skip product gallery
Hand-Held Drench Hoses
From
CHF 360.00*
Safety Eye Showers
From
CHF 230.00*
Mini Eyewash Station Eyes Fresh
From
CHF 267.00*
Eye-/face wash unit PremiumLine
From
CHF 1,042.05*
Wall/table bracket for hand-held eye showers
From
CHF 32.30*
Similar products
Two sprays in one. The hose can be used as a fixed eyewash when fitted into the mount. This allows the injured person to use both hands to hold open the eyes. The hose can also be removed from the mount so that other body parts and reclining patients can be treated.For wall and table mountingWall-/ table mount includedaccording to DIN 1988 und DIN EN 1717according to DIN EN 15154-2:2006 and ANSI Z358.1-2014DIN-DVGW tested and certificatedDIN certification label includedThe spray heads ensure a wide distribution of water so that areas around the eyes are also covered and the exact positioning of the eyes is therefore not criticalLarge holes in the spray heads protect against limescale. The spray heads can be removed for cleaning purposesRubber shrouds on the nozzles help prevent accidental injurySelf-closing valve with squeeze lever operationLightweight dust caps fall off automatically on operationIntegral jet regulator keeps the water jet constant independent of the water pressureBuilt-in non-return valve prevents any backflow of contaminated waterSpray height:250mmHose length:1500mmConnection:1/2" swivel nutWater output:7 litres/min per spray head, regulatedInlet fitting:M 28 x 80mm.
With two high performance spray headsDust caps, which open automatically on operation, protect against dirt inside the spray headsRubber sleeves protect the person seeking help against further injuriesTable and wall mounting bracketStainless steel covered hose 1500 mmFlow rate: 7 liter / minute / spray headIntegrated flow regulation which guarantees uniform jet of water independent from water pressureAccording to ANSI Z358.1-2014 and DIN EN 15154-2:2006DIN-DVGW tested and certified
Ideal for the lab, filling stations or all work places where aggressive substances are used. "Eyes Fresh" can be attached to any standard cold water tap. For normal use of the tap, just press the button and the function changes back from the eye wash (returns automatically to eyewash-function when the tap is closed). Can be fitted onto taps with M22x1, 1/2" or 3/8" outer thread.
PremiumLine eye-/face wash unit with bowl and lid, wall mountedHousing, lid and bowl made of UV and impact resistant ABS plasticsIntegrated protective cover against dustActuation by pulling down the lidBall valve 3/8“ of stainless steel, with lever actuation by lid, DIN-DVGW tested and certificatedAerators made of brass with a very limited spray pattern, chrome-platedWith integrated flow regulation valve 3/8” for setting the desired spray height and flow rateInclusive sign for eye shower according to DIN EN ISO 7010 und ASR A1.3 on the lid, dimensions 170 x 170 mm, viewing distance 17 metresMounting height (lower edge) 910 mm (± 200 mm)According to BGI/GUV-I 850-0, DIN 1988 and DIN EN 1717According to ANSI Z358.1-2014 and DIN EN 15154-2:2006DIN-DVGW tested and certificatedDimensions (H x W x D):245 x 355 x 305 mmOperating pressure:2.5 to 5 barFlow rate:14-20 l/minWater inlet:3/8” maleWater outlet:1 ½” male
table mounting dimensions: M28 x 80mminstallation dimension: 30mmfastening-parts kit: for surface mountingseal to table surface: with joint ring