Automatic burettes, borosilicate glass 3.3, class AS, brown

Manufactured from pre-vacuum calibrated borosilicate glass. They meet the highest quality standards according to DIN EN ISO 385

Permanent quality control through all steps eliminates possible deviations from nominal values

Calibrated to deliver (Ex) and the tolerances are according to DIN/ISO Class "AS" standards

Conformity ("DE-M") certified, with a batch number printed on the body. Batch certificate can be downloaded from the suppliers website

Supplied with an automatic zeroing system, VALVE stopcock and also an intermediate PTFE stopcock to recirculate the remaining liquid

Inscriptions and graduations are printed with white enamel

Please order glass bottles and bellows separately.

Accuracy class:	AS
Colour:	Brown
Colour graduation:	White
Division:	0.02 ml
Manufacturer Article Number:	019.05.010
Material:	Boro 3.3
Material stopcock:	PTFE spindle
Nominal capacity:	10 ml
Standard:	DIN EN ISO 385
Tolerance:	0,02 ± ml, 0,02 ±·ml
UNSPSC:	41121808
With Schellbach stripe:	No

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Division	Manufacturer Article Number	Nominal capacity	Tolerance

Accessories

ISOLAB Laborgeräte GmbH

Burette bottles, borosilicate glass 3.3

Burette bottle for automatic burettes is made from heat resistant glass. Each bottle has a NS 29/32 neck grinding that fits to burette.

From CHF 38.50*

ISOLAB Laborgeräte GmbH

Hand bellows

Burette bellows for automatic burettes is made out of best quality natural rubber.

From CHF 13.00*

Similar products

Burettes, with straight stopcock, borosilicate glass 3.3, class AS

With class AS, conformity certified, with batch identification, blue graduations, DIN EN ISO 385. PTFE spindle.

From CHF 67.30*

Burette clamp

Polypropylene. Bosshead supplied with two adapters so that the clamp can fit on to support rods having diameters 8 to 14mm. Stainless steel spring loaded centre arm holds burette firmly against the two outer arms and is protected by rubber grips. Graduations and meniscus are visible at all times. Suitable for all burettes.

From CHF 21.00*

Automatic burettes acc. to Schilling pattern, blue graduation, DURAN®

Fast flow burette with 500 ml plastic reservoir bottle (up to 10 ml) or 1000 ml (from 15 ml). Schellbach stripe and graduation in high contrast blue enamel.

From CHF 100.00*

Automatic burettes, schilling pattern, borosilicate glass 3.3/LDPE

Described as automatic burettes with fast titration and practical usageEspecially suitable for field analysis where there is a risk of breakingThe entire system consists of a burette tubing with automatic zeroing system together with a valve stopcock, a reservoir bottle and a bottle standRapid filling by squeezing the bottle and fast titration by valve stopcockInscriptions and graduations are printed with blue enamel which is specially designed for glass useClear burettes are manufactured with schellbach stripe10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used with bottles of 1000 ml volume

From CHF 104.00*

Burettes, with lateral valve cock, borosilicate glass 3.3, class AS

All BLAUBRAND® burettes are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Blaubrand®DIN EN ISO 385DE-M markingGraduations and inscriptions in high contrast blue enamelWith Schellbach stripeCalibrated to deliver (EX)

From CHF 132.80*

Automatic burettes with splinter protection, Schilling pattern, borosilicate glass 3.3

Burette according to Dr. Schilling with splinter protection, with Schellbach stripes, automatic zero point extraction and Bürkle dosing device. The glass burette is covered with a plastic sheet which increases the tensile strength and serves as splinter protection. The probability that the burette breaks is reduced compared to conventional burettes and even in case the burette breaks, no dangerous splinters will be produced. The dosing device allows precise dosage via the pushbutton or via the micro-screw as well as precise dispensing via a fine spout tip.With splinter protectionAdjusted to ExShatterproof, resistant to chemicalsExact spout tip, fine droplet formationParts in contact with the medium: PE, natural rubber, PP, Borosilicate glass

From CHF 111.00*

Automatic burettes, glass, Schilling pattern, boro 3.3, class B

Silberbrand. Tolerances to class B, DIN EN ISO 385. Borosilicate glass 3.3 burette. PVC filling tube and silicone outlet tubing. LDPE reservoir bottle with HDPE base. Brass / PP micrometer screw. Graduations and inscriptions are in highly contrasting black enamel. With Schellbach stripes. Squeezing of bottle allows rapid filling. Fine titration is easy using the micrometer screw. Coarse titration is achieved by removal of the micrometer screw and using the push button. Calibrated to deliver (EX).

From CHF 105.40*

Automatic burettes, schilling pattern, amber glass, borosilicate glass 3.3/LDPE

Described as automatic burettes with fast titration and practical usageEspecially suitable for field analysis where there is a risk of breakingThe entire system consists of a burette tubing with automatic zeroing system together with a valve stopcock, a reservoir bottle and a bottle standRapid filling by squeezing the bottle and fast titration by valve stopcockInscriptions and graduations are printed with white enamel which is specially designed for glass useAmber burettes are manufactured without schellbach stripe10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used with bottles of 1000 ml volume

From CHF 125.00*

Analytical volumetric solutions

Suitable for manual and automatic titrations. Stability is proven (either opened or unopened) for the entire shelf life. Tested acc. to ISO17025.

From CHF 19.80*

Titration indicators

Indicator solutions for endpoint determination in the performance of titrations.

From CHF 30.40*