Bottle Top Filters Nalgene™, PSU, without membrane | Type: DS0320
CHF 218.40*
Content:
1
18 Available. Delivery time: 5-7 workdays
Product number:
9059506
Manufacturer:
Thermo Elect.LED GmbH (Nalge)
Weight:
0.18 kg
* Specifications refer to the packaging unit
Reusable, PSU filter manifolds for fitting onto bottles with 33mm or 45mm screw neck diameters. Non-toxic. Robust body with removable membrane support plate. Suitable for pressure filtration up to 600mbar and vacuum filtration. With seal, cap and tubing adapter on lower half of the assembly. Autoclavable. Without membrane (47mm or 50mm diameter can be fitted).
| Manufacturer Article Number: | DS0320-2533 |
|---|---|
| Membrane diam. mm: | 47 - 50 |
| Thread GL: | 33 |
| Type: | DS0320 |
| Volume ml: | 250 |
Other customers also bought
Thermo Elect.LED GmbH (Nalge)
Bottle Top Filters Nalgene™ Rapid-Flow™, SFCA Membrane, sterile
Tissue culture filters for screw fitting onto bottles with 33mm or 45mm neck diameters. With surfactant-free, cellulose acetate membrane (SFCA) and polystyrene (PS) housing. Gamma-irradiated sterile. Pyrogen-free. Non cytotoxic. Low-pressure filtration can be carried out directly into a suitable sterile bottle. Caution: Only use sterile bottles authorised for use in low pressure applications. Always wear protective equipment for low pressure procedures. The membrane is characterised by its low protein binding, good throughput rates and minimal clogging with negligible protein loss. Permanent, moulded graduations. Quick-disconnection tubing adaptor with cellulosic vent plug for tubing with an internal diameter of 6mm to 9mm. Lot number, catalogue number, membrane type, pore size and expiration date are printed on filter units for easy identification and lot traceability.
Similar products
Rubber Spacers, made of natural rubber (NR). Conical, to fit filter funnels or crucibles into suction flasks. Durometer 40 Shore A
DIN 12476. ISO 6556. With PBT tubing connection and silicone (VMQ) seal. Heavy wall for vacuum use. These filtering flasks fulfil the regulations of the equipment and product safety regulations.
With sintered glass filter disc at base, as outlined below.Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.
According to ISO 6556 standards. The side arm is suitable to work with 6 mm to 10 mm hose diameters.
Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.