Burettes, with straight stopcock, DURAN®, class AS, with glass key

Schellbach line for easier reading, declaration of conformity acc. to DIN 12600, with dated batch identification, high-contrast blue graduations, main point ring graduation at major subdivisions, EX (TD) calibrated, acc. to DIN EN ISO 385. Scale length approx. 500 mm.
For those products batch calibration reports, which are free of charge, can be generated and printed on www.hirschmannlab.de. Additional single calibration reports or DAkkS certificates (former DKD calibration reports) are available.

Accuracy class:	AS
Colour graduation:	Blue
Division:	0.1 ml
Length skale:	500 mm
Manufacturer Article Number:	3140175
Material stopcock:	Glass key
Nominal capacity:	50 ml
Stopcock:	Straight
Tolerance:	0.05 ml
UNSPSC:	41121808
With Schellbach stripe:	Yes

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Division	Manufacturer Article Number	Nominal capacity	Tolerance

Similar products

Burettes, with straight stopcock, borosilicate glass 3.3, class AS

With class AS, conformity certified, with batch identification, blue graduations, DIN EN ISO 385. PTFE spindle.

From CHF 67.30*

Burette clamp

Polypropylene. Bosshead supplied with two adapters so that the clamp can fit on to support rods having diameters 8 to 14mm. Stainless steel spring loaded centre arm holds burette firmly against the two outer arms and is protected by rubber grips. Graduations and meniscus are visible at all times. Suitable for all burettes.

From CHF 21.00*

Automatic burettes acc. to Schilling pattern, blue graduation, DURAN®

Fast flow burette with 500 ml plastic reservoir bottle (up to 10 ml) or 1000 ml (from 15 ml). Schellbach stripe and graduation in high contrast blue enamel.

From CHF 100.00*

Automatic burettes, schilling pattern, borosilicate glass 3.3/LDPE

Described as automatic burettes with fast titration and practical usageEspecially suitable for field analysis where there is a risk of breakingThe entire system consists of a burette tubing with automatic zeroing system together with a valve stopcock, a reservoir bottle and a bottle standRapid filling by squeezing the bottle and fast titration by valve stopcockInscriptions and graduations are printed with blue enamel which is specially designed for glass useClear burettes are manufactured with schellbach stripe10 ml burette has a polyethylene reservoir bottle of 500 ml volume whereas 25 and 50 ml burettes are used with bottles of 1000 ml volume

From CHF 104.00*

Burettes, with lateral valve cock, borosilicate glass 3.3, class AS

All BLAUBRAND® burettes are supplied with batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate. Blaubrand®DIN EN ISO 385DE-M markingGraduations and inscriptions in high contrast blue enamelWith Schellbach stripeCalibrated to deliver (EX)

From CHF 132.80*

Automatic burettes with splinter protection, Schilling pattern, borosilicate glass 3.3

Burette according to Dr. Schilling with splinter protection, with Schellbach stripes, automatic zero point extraction and Bürkle dosing device. The glass burette is covered with a plastic sheet which increases the tensile strength and serves as splinter protection. The probability that the burette breaks is reduced compared to conventional burettes and even in case the burette breaks, no dangerous splinters will be produced. The dosing device allows precise dosage via the pushbutton or via the micro-screw as well as precise dispensing via a fine spout tip.With splinter protectionAdjusted to ExShatterproof, resistant to chemicalsExact spout tip, fine droplet formationParts in contact with the medium: PE, natural rubber, PP, Borosilicate glass

From CHF 111.00*

Automatic burettes, glass, Schilling pattern, boro 3.3, class B

Silberbrand. Tolerances to class B, DIN EN ISO 385. Borosilicate glass 3.3 burette. PVC filling tube and silicone outlet tubing. LDPE reservoir bottle with HDPE base. Brass / PP micrometer screw. Graduations and inscriptions are in highly contrasting black enamel. With Schellbach stripes. Squeezing of bottle allows rapid filling. Fine titration is easy using the micrometer screw. Coarse titration is achieved by removal of the micrometer screw and using the push button. Calibrated to deliver (EX).

From CHF 105.40*

Compact burettes "Economy", boro 3.3, class B

SILBERBRANDDIN EN ISO 385Removable PTFE stopcock with tipCalibrated to deliver (TD, Ex)Scope of supply:Burette tube, burette stopcock with PP tip

From CHF 110.20*

Compact burettes, boro 3.3, amber, class AS

BLAUBRAND®. Fast to dismantle and easy to clean. All individual components are replaceable. All BLAUBRAND® burettes are delivered with batch number and enclosed one batch certificate per packing unit of the manufacturer. On demand also available with individual certificate, USP Individual certificate or DAkkS calibration certificate.With PTFE stopcockDIN EN ISO 385DE-M markingCalibrated to deliver (TD, Ex)

From CHF 121.50*

Compact automatic burettes, amber glass, class AS, BLAUBRAND®, with PE-bottle

Fast to dismantle and easy to clean. All individual components are replaceable. All BLAUBRAND® automatic burettes are supplied with a batch number and an accompanying batch certificate in the original packaging. On request, they are also available with an individual certificate, USP individual certificate or DAkkS calibration certificate.Detachable PTFE stopcockDIN EN ISO 385DE-M markingCalibrated to deliver (TD, Ex)

From CHF 201.10*