CO2 incubators CBF, with humidity control | Type: CBF260

Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.

  • Anti-contamination concept with 180 °C hot air sterilization
  • CO2 sensor with single-beam infrared technology
  • Seamless inner chamber made of stainless steel
  • Fanless interior with Venturi CO2 gas mixing nozzle
  • Internal data logger, measured values can be read out via USB
  • Troubleshooting system with visual and acoustic alarms
  • Interfaces: Ethernet, USB, zero-voltage alarm contact

  • Contamination-safe humidification system without water pan
  • Touchscreen controller
  • Fail-safe CO2 system for protecting the pH of cell cultures

CO₂ range: N/A ... N/A
Depth int.: 575 mm
Ext. depth: 785 mm
Ext. height: 1020 mm
Ext. width: 740 mm
External dimensions (WxDxH): 740 x 785 x 1020 mm
Height int.: 750 mm
Int. width: 620 mm
Internal dimensions (WxDxH): 620 x 575 x 750 mm
Material interior: Stainless steel
Max. no. of inserts: 8
Max. relative humidity: 95 %
Max. temperature: 60 °C
Min. relative humidity: 50 %
Min. temperature: +6 °C
Nominal capacity: 267 l
Plug type: EU
Power supply: 200 ... 230 V, 50/60 Hz
Rated capacity: 1.5 kW
Relative humidity: 50 ... 95 %
Temperature: RT+6 ... 60 °C
Temperature addition: RT
Temperature stability: ±0,1 K
Type: CBF260
Type of auxiliary energy: Mains connection
Weight: 125 kg

Accessories

BINDER GmbH
Divided inner doors for CO2 incubators CB / CBF
Divided inner door with cell therapy compartmentalisation. This option is equipped with additional partition walls for spatial incubation subdivision to prevent mixing up of sample vessels.
From CHF 2,015.00*

BINDER GmbH
Alternative O2 control range for CO2 incubators CB / CBF
For controlling O2 concentrations between 10 and 95 vol. % in CO2 incubators.Only in conjunction with model variants with O2 control.
From CHF 582.00*

BINDER GmbH
Base frames for CO2 incubators CB series
The base frame equipped with casters is used for the secure positioning and leveling of CO2 incubators.
From CHF 490.80*

BINDER GmbH
Stacking adapters for CO2 incubators CB series
Suitable for thermally isolated stacking of two CO2 incubators.
From CHF 490.80*

BINDER GmbH
Quick sample access for CO2 incubators CB / CBF
Viewing window (13 x 25 cm) in the inner door for quick access to the samples.
From CHF 633.60*

BINDER GmbH
Access port with silicone plug for CO2 incubators CB series
Access port 30 mm with silicone plug.
From CHF 606.00*

BINDER GmbH
Stacking frames for CO2 incubators CB series
Stable, vibration-free stacking frame on casters with stop brake for safe stacking of two CO2 incubators.
From CHF 1,762.00*

BINDER GmbH
Shelves for CO2 incubators CB
Made of stainless steel, perforated.
From CHF 369.60*

BINDER GmbH
Door hinge on the left for CO2 incubators CB series
Outer door and standard glass inner door with door hinge on the left.
From CHF 783.60*

Other customers also bought

BINDER GmbH
CO2 incubators CB-S Solid.Line
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionPID controller with LCD display
From CHF 9,428.00*
Tip

BINDER GmbH
CO2 incubators CB
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
From CHF 10,051.00*

Similar products

Tip

BINDER GmbH
CO2 incubators CB
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
From CHF 10,051.00*

CO2 Incubators with Chambers Heracell™ 150i/240i
Protect valuable samples while optimizing cell growth. CO2 incubators with stainless steel or copper chambers provide the ideal in-vitro environment. Clean, reliable and easy to use, they feature fast recovery characteristics and a convenient touchscreen user-interface.
From CHF 14,445.00*

CO2 incubators CB-O, with O2 control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactHumidification system with condensation protectionTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
From CHF 15,701.00*

BINDER GmbH
Divided inner doors for CO2 incubators CB / CBF
Divided inner door with cell therapy compartmentalisation. This option is equipped with additional partition walls for spatial incubation subdivision to prevent mixing up of sample vessels.
From CHF 2,015.00*

BINDER GmbH
Stacking adapters for CO2 incubators CB series
Suitable for thermally isolated stacking of two CO2 incubators.
From CHF 490.80*

BINDER GmbH
Base frames for CO2 incubators CB series
The base frame equipped with casters is used for the secure positioning and leveling of CO2 incubators.
From CHF 490.80*

BINDER GmbH
Door hinge on the left for CO2 incubators CB series
Outer door and standard glass inner door with door hinge on the left.
From CHF 783.60*

BINDER GmbH
Access port with silicone plug for CO2 incubators CB series
Access port 30 mm with silicone plug.
From CHF 606.00*

CO2 incubators CBF, with humidity control
Suitable for routine cell cultivation applications and incubation tasks, also for complex approaches under hypoxic conditions. Models with additional O2 control are available.Anti-contamination concept with 180 °C hot air sterilizationCO2 sensor with single-beam infrared technologySeamless inner chamber made of stainless steelFanless interior with Venturi CO2 gas mixing nozzleInternal data logger, measured values can be read out via USBTroubleshooting system with visual and acoustic alarmsInterfaces: Ethernet, USB, zero-voltage alarm contactContamination-safe humidification system without water panTouchscreen controllerFail-safe CO2 system for protecting the pH of cell cultures
From CHF 14,984.00*