Centrifuge tubes, with CentriStar™ Cap
Corning BV
CHF 260.40*
Content:
500
Delivery according to order confirmation
Product number:
7085837
Manufacturer:
Corning BV
Packaging information:
Length:
516 mm
Width:
305 mm
Height:
465 mm
Weight:
7.78 kg
Description
Properties
| Manufacturer Article Number: | 430829 |
|---|---|
| Material: | PP |
| Max. rcf: | 15500 x·g |
| Nominal capacity: | 50 ml |
| UNSPSC: | 41121703 |
Skip product gallery
LLG-Centrifuge tubes economy, PP
From
CHF 122.00*
Centrifuge tubes, round bottom, AR glass®, ungraduated
From
CHF 0.30*
Centrifuge tubes Nalgene™ Oak Ridge, PPCO, with sealing caps, PP
From
CHF 15.40*
Centrifuge tubes, round bottom, DURAN®
From
CHF 6.30*
Eppendorf Tubes® 5.0 mL, PP, with hinged lid
From
CHF 50.80*
LLG-Microcentrifuge tubes, PP, with Safe-Lock lid
From
CHF 24.00*
Centrifuge bottles Nalgene™, PP-copolymer
From
CHF 16.30*
Test and Centrifuge Tubes Falcon®, PS and PP, with graduation
From
CHF 169.40*
Nalgene™ Oak-Ridge centrifuge tubes, PP-copolymer
From
CHF 9.90*
Similar products
With flat PE capsWith conical bottom (15 and 50 ml) or with self-standing bottom (50 ml)Easy-to-read black volume graduationsWith a large frosted writing areaEngraved graduation at the conical bottom of each tubeMax. rotate speed up to 12000 x g for conical bottom tubes and 6000 x g for self-standing tubesAutoclavable at 121 °C and freezable to -80 °CLeak-proofFree of pyrogensDNase/RNase-freeAseptically or sterileFor research and development only.
Maximum loading: 3500 x g rcf. Smooth rim, wall thickness: 2.0 mm.
Transparent. For use up to 50,000 x g in cooled and uncooled centrifuges (Cat. no. 9.315685 can be used up to 100,605 x g). PP sealing caps with silicone seal for additional leak protection when centrifugation at >10,000 x g or when centrifugation of hazardous substances.Round bottomGood mechanical strengthHigher chemical resistance than polycarbonateMultiple autoclavableLeak-proof
To DIN 58970 part 2. Glass Type I / neutral glass as per USP, EP and JP. Autoclavable.Maximum loading: 4000xg rcf.* Not to DIN.
Simple, practical and ergonomic single-hand operationLarge labelling areaCertified purity: Available in lot-tested and certified Eppendorf Quality, PCR clean, Sterile and Eppendorf Biopur® purity levelsMaximum safety and stability for centrifugation up to 25000 x gCompatible with accessories for conical 15 ml tubes - many existing adapters and racks can be usedHinged lid for minimized sample evaporation during storage and incubation in a wide range of temperatures from -86 °C to 80 °CFrom 80 °C on, please use tube clips (cat. no. 9.409 294)
Tip
LLG-Microcentrifuge tubes are versatile and suitable for general laboratory applications such as incubation, centrifugation, and storage of samples. With tight-fitting Safe-Lock lid, which prevents unintentional opening of the lid during centrifugation.Frosted labelling area on the lidLid membrane can be easily piercedEasy opening and closing with one handGraduation lines for visual volume controlRNase- and DNase-freeTemperature range -86 up to 121 °C
PP-copolymer with PP screw cap. Autoclavable.
Widely used and referenced in laboratory protocols.Round bottomDual position snap-cap, PE for easy handling as indicatedSterile, pyrogen-free (<0.1 EU/ ml)
PP-copolymer with PP screw cap. PPCO is more resistant to chemicals than PC. Autoclavable. When wet, the translucent test-tube enables observation of the contents. Can be used in refrigerated and unrefrigerated centrifuges at up to 50,000 x g rcf. Accessory sealing cap assemblies are available for all sizes.