Clamps
CHF 7.60*
% CHF 13.80* (44.93% saved)
Content:
1
26 Available. Delivery time: 1-2 workdays
Product number:
9224304
Manufacturer:
Carl Friedrich Usbeck KG
Packaging information:
Length:
216 mm
Width:
43 mm
Height:
25 mm
Weight:
0.188 kg
Description
To DIN 12894. B form. Zinc die casting, powder-coated. With round jaws.
Properties
| Clamping range: | 20 ... 40 mm |
|---|---|
| Manufacturer Article Number: | 2550 |
| Material: | Die-cast zinc |
| Max. clamping width: | 40 mm |
| Min. clamping width: | 20 mm |
| Type of coating: | Powder-coated |
Skip product gallery
From
CHF 242.00*
From
CHF 7.05*
From
CHF 21.20*
From
CHF 117.00*
Other customers also bought
BOCHEM Instrumente GmbH
BOCHEM Instrumente GmbH
Beaker and flask clamp, 18/10 steel
4 prong with silicone corered jaws.
Carl Friedrich Usbeck KG
Carl Friedrich Usbeck KG
Clamps
To DIN 12894. B form. Zinc die casting, powder-coated. With round jaws.
Carl Friedrich Usbeck KG
Carl Friedrich Usbeck KG
Clamp
Zinc die casting, nickel-plated, vinyl-coated jaws.. Rod diameter 10mm.
BOCHEM Instrumente GmbH
BOCHEM Instrumente GmbH
BOCHEM Instrumente GmbH
Retort clamp, 18/10 stainless steel
3-prong with plastic covered jaws.
BOCHEM Instrumente GmbH
Skip product gallery
Bosshead
From
CHF 13.90*
Burette holders
From
CHF 37.20*
Bossheads, zinc die casting, with brass screws
From
CHF 5.80*
Cross bosshead, cast steel
From
CHF 15.70*
Table clamps for rods, malleable cast iron, coated
From
CHF 85.90*
Bossheads, Zinc die casting, with steel screws
From
CHF 5.15*
Rectangular retort stand bases, enamel, coated steel plate
From
CHF 40.40*
Similar products
Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.
Aluminium, powder-coated. With roller grips and bosshead for retort stand rods.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Chrome plated cast steel. Suitable for frame works and fixing perpendiculars. Can be moved vertically and horizontally along the rods.
For table tops with a thickness of max. 55mm. Rod diameter 12/13mm.
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Highly stable laboratory stand due to the steel rectangular base which is stove enamel coated. With an M10 threaded hole in the middle of one short side. Rubber support feet prevents the stand from sliding. Laboratory stands are supplied without support rod. Please select the suitable rod from "support rods".
