Climatic Test Chamber CTC256/Temperature Test chamber TTC256 | Type: CTC256
CHF 31,080.00*
Content:
1
Delivery according to order confirmation
Product number:
9868010
Manufacturer:
Memmert GmbH + Co. KG
Weight:
421 kg
* Specifications refer to the packaging unit
Simulate the perfect atmosphere for climate and temperature tests, specifically in accordance with DIN EN 60068-2-1, 2-2 and 2-3. Provide unlimited flexibility for controlled material and function tests as well as ageing tests.
Standard equipment
Ventilation and Control:
CTC/TTC: without humidity control: from -42°C up to +190°C
CTC: with humidity control: from +10°C up to +95°C
Power supply 400 V, 3ph, N, 50 Hz
Standards for CTC additionally:
Standard equipment
Ventilation and Control:
- high-performance air fan in working chamber
- depending on operation status automatically variable fan speed with manual adjustment from 10% to 100%
- adaptive, fuzzy-supported multifunctional digital microprocessor PID-controller
- autodiagnostic system with fault indication on temperature and humidity control
- 2 x Class A, 4-wire circuit, Pt100 sensors, mutually monitoring and maintaining performance at the same temperature value
- digital 7-day-programme-timer with real time clock, precise minute setting
- integral timer for heating profiles of up to 40 ramps, each segment adjustable from 1 min. up to 999 hours
- digital display (LED) of all set parameters, such as temperature, weekdays, time, humidity and set-up values - language to be chosen in setup
- digital display of set values (resolution: 0.1°C below 99.9°C, 0.5°C above 100°C) and actual values (resolution: 0.1°C) of temperature (LED)
- long-term documenting (ring store) of all relevant data, GLP-conforming as data logger - 1024 kB
- programme stored on power failure
- parallel printer interface (incl. real-time clock with date function) for all PCL3-compatible ink-jet printers for GLP-conforming documentation
- USB interface including Memmert "Celsius" software for programming and documentation
- chip card control incl. one MEMoryCard XL with 32 kB (up to 40 ramps)
- incl. works calibration certificate for -20°C and +160°C
- high-performance ring heaters with optimised air circulation
- door heating to avoid condensate
- twin compressor
- speed adjustable condenser fan
- refrigerant R404A
- with audible and visual alarm in case of over-/undertemperature and over-/under-humidity, open door and empty water tank
- independently working, digitally adjustable electronic overtemperature controller, TWW protection class 3.3
- additional adjustable Auto-Safety-Function "ASF" for over- and undertemperature automatically following the set value at a preset tolerance range
- mechanical temperature limiter TB class 1 switching the heating off at approx.10°C above max. oven temperature
CTC/TTC: without humidity control: from -42°C up to +190°C
CTC: with humidity control: from +10°C up to +95°C
Power supply 400 V, 3ph, N, 50 Hz
Standards for CTC additionally:
- Electronically controlled active humidification and dehumidification from 10% to 98% rh with digital display of the relative humidity, display resolution 0.5%, setting accuracy 1%
- incl. works calibration certificate for +30°C at 60% rh
- Humidity supply with distilled water from 2 x 10 l tanks on integrated telescopic slide, with automatic water tank change-over
- 2 x 10L tanks acting as condensate collectors, on telescopic slide mounts
| Capacity l: | 256 |
|---|---|
| Dual Use: | 0 |
| Housing (W x D x H) mm: | 898 x 1100 x 1730 |
| Internal dimensions (W x D x H) mm: | 640 x 597 x 670 |
| Manufacturer Article Number: | CTC256 |
| Rating W: | 7000 |
| Shelf support ribs/shelves: | 6/1 |
| Type: | CTC256 |
| Weight kg: | 337 |
Similar products
For long-term stable temperature/humidity simulations in one chamber. The constant climate chambers are ideal for norm-compliant work according to ICH guidelines and work independently of the water supply.KBF Series: Constant climate chambers with large temperature range: 0 °C to 70 °C and humidity range: 10 % RH to 80 % RH.KMF Series: Ideal for demanding stress tests, e.g. at 85 °C and 85 % RH. Temperature range: -10 °C to 100 °C and humidity range 10 % RH to 98 % RH.Equipment: Electronically controlled APT.line™ preheating chamber with cooling systemInner chamber made of stainless steelIntuitive touchscreen controller with time-segment and real-time programming with internal data recordingHumidity regulation with capacitive humidity sensor and vapor humidificationInner glass door with sealIndependent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarmAvoidance of glass corrosion by special TIMELESS coatingAccess port with silicone plug diam. 30mm, left sideDoor heatingEthernet interface for communication software APT-COM™ DataControlSystemInternal data logger, measured values can be read out in open format via USBPower supply 200 ... 230 V, 50/60 Hz
Homogeneous lighting conditions with constant temperature and humidity conditions, the BINDER growth chambers. The responsive humidification system, the high-performance cooling and uniform light distribution ensure optimal growth conditions.KBW Series: Growth chambers with lightKBWF Series: Growths chambers with light and humidityEquipment:Electronically controlled APT.line™ preheating chamberTemperature range 0 °C to 70 °C (without humidity and illumination)Humidity range 10 % to 80 % RH (KBWF)Variable position illumination cassettes each with 5 daylight fluorescent illumination tubesController with time-segment and real-time programmingHumidity regulation with capacitative humidity sensor and vapor humidification (KBWF)Independent temperature safety device class 3.1 (DIN 12880) with optical and audible temperature alarmInterface: Ethernet, RS 485 (optional)
Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. Particularly energy-efficient and low-noise thanks to Peltier technology with patented heat dissipation.Homogeneous climate even with full loadElectronically controlled APT.line™ preheating chamber technologyTemperatures up to 28 °C below ambient temperature possibleInner chamber made completely of stainless steel2 stainless steel grids incl. shelf supportAccess port with silicone plug Ø 30 mm, left sideUnit self-test for comprehensive status analysisLCD display for indication of temperature, humidity, alarms and additional informationInternal data logger with USB interfaceIndependent water supply via canistersHumidity range:10 ... 80 % rHTemperature range:0 ... 70 °CTemperature fluctuation at 40 °C:± 0.1 K
The material test chambers with mechanical convection reliably ensure short drying times and fast heating. Thanks to programme functions and adjustable fan, temperature and recirculation conditions can be individually controlled even over a longer period of time.High temperature accuracy due to APT.line™ technologyAdjustable fan speedController with interval and real-time programmingUser-friendly controller with large displayElectromechanical control of the exhaust air flapClass 2 independent adjustable temperature safety device (DIN 12880) and class 3.1 independent temperature safety device (DIN 12880) with visual/acoustic alarm selectable on controllerModels up to 115 l stackableErgonomic handle designComputer interface: EthernetInternal data logger, measured values can be read out in open format via USB
Constant climate chambers for long-term tests and accelerated stability tests of pharmaceutical products according to the ICH guideline Q1A. With corrosion and condensate-free stainless steel interior for homogeneous temperature and humidity conditions.Electronically controlled APT.line™ preheating chamber with cooling systemInner chamber made completely of stainless steel2 stainless steel racks incl. shelf supportIntuitive touchscreen controller with time segment and real-time programming with internal measured value recordingHumidity control with capacitive humidity sensor and vapor humidificationIndependent temperature safety device class 3.1 (DIN 12880) with optical and audible alarmAccess port with silicone plug diam. 30mm, left sideLCD display for indication of temperature, humidity, alarms and additional informationInternal data logger with USB interfaceIndependent water supply via canistersModels from 240 l capacity with double swivel castors and brakeSpecificationsHumidity range:20 ... 80 % r.F.Humidity accuracy:2.0 %Temperature range:0 ... 70 °CTemperature accuracy:±0.1 °CComputer interface:EthernetPower supply:200 ... 230 V, 50/60 Hz
The Memmert humidity chamber HCP - This climate chamber offers a full range of comfort, reliability and safety. This humidity chamber is ideally suited for environmental testing, environmental simulation, accelerated service life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.The active humidity control is the guarantee for ideal homogeneity of temperature and humidity as well as for short recovery times after opening the door. In combination with heating on all six sides, including heated inner glass door, it also minimises vaporisation in the interior and thus the risk of condensed water dripping onto the test object. An aluminium thermal conductive layer supports optimum temperature distribution and serves as a heat accumulator in case of a temporary power failure.Model variant TwinDISPLAY: ControlCOCKPIT with two colour displaysYou can find a detailed description of the "TwinDISPLAY" model at www.memmert.comSpecificationsSetting range active humidity control:20 to 95 % rhSetting accurate humidity:0.5 % rhWorking temperature range:at least 7 °C above ambient up to +90 °CSetting temperature range:+18 °C to +90 °CSetting accurate temperature:0.1 °CPower supply:230 V, 50/60 Hz* Less 35 mm for fan** Depth without door handle, depth of door handle 56 mm