Conductivity Pocket Tester Elite CTS Pin/Cup | Type: Elite CTS Pin
45
%
CHF 93.50*
% CHF 170.00* (45% saved)
Content:
1
Delivery according to order confirmation
Product number:
6290132
Manufacturer:
Thermo Elect.LED GmbH (Eutech)
Weight:
0.341 kg
* Specifications refer to the packaging unit
The Elite CTS pocket tester simultaneously displays conductivity/TDS/salinity with temperature. Available with Pin or with Cup Sensor. With leakproof, transparent wide-base cap for upright standing with fill line indicator.
Scope of supply:
Elite CTS Pin/Cup: Tester incl. batteries, laynard
Elite CTS Pin/Cup Kit: Tester incl. batteries, laynard, soft carry case, CTS conductivity Standard Sachets (5 x 1413 µS/cm KCl and 5 x 2764 µS/cm KCl)
- 1-push calibration
- Large 4-digit double line display
- Backlit graphic display
- Auto-hold readings
- Easy-to-operate, intuitive keypad
- Auto-off
Scope of supply:
Elite CTS Pin/Cup: Tester incl. batteries, laynard
Elite CTS Pin/Cup Kit: Tester incl. batteries, laynard, soft carry case, CTS conductivity Standard Sachets (5 x 1413 µS/cm KCl and 5 x 2764 µS/cm KCl)
| Specifications | |
| Conductivity range: | 0.0 … 200.0 µS / 200 … 2000 µS / 2.00 … 20.00 mS |
| Resolution: | 0.1 µS / 1 µS / 0.01 mS |
| Accuracy: Calibration points: | ± 1 % full scale 1 ... 3 points |
| TDS range: | 0.0 … 100.0 ppm / 100 ... 1000 ppm / 100 ... 10000 ppm |
| Resolution: | 0.1 ppm / 1 ppm / 10 ppm |
| Accuracy: Calibration points: | ± 1 % full scale 1 ... 3 points |
| Salinity range: Resolution: Accuracy: | 0 … 10000 ppm 100 ppm ± 1 % full scale |
| Calibration points: | 1 point |
| Temperature range: Resolution: | 0 … 60.0 °C 0.1 °C |
| Accuracy: | 0 … 50 °C (±0.5 °C + 1 LSD) 50 … 60 °C (±1.0 °C + 1 LSD) |
| Operating temperature: Relative humidity: | 5 … 45 °C 5 … 85 %, non-condensing |
| Temperature compensation: | ATC |
| Dimensions (W x L x H): Weight Elite CTS Pin/Cup: | 202 x 45 x 36 mm 160 g / 150 g |
| Power supply: IP code: | 4 x AAA 1.5 V batteries IP 67 |
| Type: | Elite CTS Pin |
|---|
Similar products
The ProfiLine hand-held conductivity meters have a waterproof (IP 67) housing and a completely sealed silicone membrane keypad with tactile feedback. A separate battery compartment allows easy exchange of standard alkaline, or rechargeable, batteries. The carefully laid out, large displays indicate the reading and other important information. The 3310 series meters have a backlit, graphics display and menu-controlled operation. A selection of application specific conductivity cells cover virtually all measurement tasks.Easy to operate rugged conductivity meter for measurement of conductivity and salinity. Simplified keypad for clear and secure operation. Simultaneous display of measurement value and temperature. Large LCD display for easy reading. Automatic nlF compensation for all grades of natural water. Works with four-electrode cell TetraCon® 325 or two-electrode cell KLE 325.SpecificationsMeasuring rangesConductivity:0.0 µS/cm ... 1000 mS/cm
With 5 measuring ranges in the Auto Range modeTemperature:-5.0 °C ... 105.0 °C ±0.1 °CSalinity:0.0 ... 70.0Tref:20 °C / 25 °C switchable
The ProfiLine hand-held conductivity meters have a waterproof (IP 67) housing and a completely sealed silicone membrane keypad with tactile feedback. A separate battery compartment allows easy exchange of standard alkaline, or rechargeable, batteries. The carefully laid out, large displays indicate the reading and other important information. The 3310 series meters have a backlit, graphics display and menu-controlled operation. A selection of application specific conductivity cells cover virtually all measurement tasks.Comfortable and versatile conductivity meter with integral, time controlled, data logger and 5000 GLP-compliant record memory for extended data collection. Menu controlled, with backlit, graphics display for comfortable, safe operation. Wide range of conductivity cells attachable. GLP-supporting functions, enhanced choice of cell constants, automatic and manual temperature compensation (which can be switched off) with linear and non-linear functions for pure water and natural waters acc. to EN 27888.Specifications:Measuring rangesConductivity:0.001 µS/cm ... 1000 mSTDS:0 ... 199,9 g/lSpec. resistance:0.00 ... 199 MOhm cmMemory:5000 records (measured value, temperature, date, time, ID)
Best value for a waterproof conductivity meter.Large, three line LCD, view conductivity or TDS measurement with temperature as well as cell efficiencyBuilt-in memory function, stores up to 150 measurements along with temperatureAdjustable temperature coeffcient, set to 0.0 % to meet USP methods for non-compensated measurementsAcoustic indication of necessary recalibrationPower with AA batteries or use optional AC adapterCalibrate using automatically recognized standards or manually, to a single point across all ranges or to multiple points (one calibration point per each conductivity range)Ready indicator, manual or automatic measurement hold feature and optional automatic shut-off functionAdjustable conductivity-to-TDS conversion factor, from 0.4 to 1.0Includes innovative Grip-Clip™, quickly and easily secures the electrode to your beaker or containerAdditional features CON450Backlit displayBuilt-in memory function, stores up to 500 data sets, USB and RS232 outputBuilt-in real-time clock stamps stored data and calibration data with time and date, meets standards for GLP (Good Laboratory Practices)Scope of supply: Meter, conductivity cell (K =1.0), Grip Clip™, 2 x AA batteries, hard carry case, calibration solutions (1 x 1413 µS, 12.88 mS, 84 µS KCL Standard Solutions and 1 x Deionised (Rinse) Water, 60 ml each). CON45003K additionally with USB cableSpecificationsConductivity range:
Resolution:
Accuracy:0 … 200 mS
0.01 µS … 0.1 mS
±1 % full scaleConductivity calibration:Auto / manual, 1 point per rangeTDS range:
Resolution:
Accuracy:0 … 200000 ppm (TDS factor 1.0)
0.01 ppm … 100 ppm
±1 % full scaleTDS calibration:Manual, 1 point per rangeSalinity range (CON450 only):
Resolution:
Accuracy:0 … 50000 ppm
0.01
±1 % full scaleSalinity calibration:Manual, 1 pointTemperature range:
Resolution:
Accuracy:-10.0 … 110.0 °C
0.1 °C
±0.5 °CDimensions (W x L x H):
Weight:83 x 200 x 57 mm
500 gPower supply (CON450 / CON150):Incl. 2 x AA batteries, 300 h / 500 h continuous use, AC adapter (optional)IP code:IP 67Warranty:3 years on the meter
For accurate measurement of conductivity, TDS, and salinity in one single instrument, making it an ideal solution for many applications.Large 4 digit double line displayDisplay of battery life, status and re-calibrationAutomatic temperature compensation (ATC)Auto conductivity buffer recognition and calibrationSelectable TDS factor: 0.40 to 1.00Auto offSpecificationsConductivity range:0.00 … 20.00 mS/cmResolution:10 µS/cm below 2.00 mS/cm,
0.10 mS/cm above 2.00 mS/cmAccuracy:±2 % full scale ±1 LSDTDS range:0 … 20000 ppmResolution:10 ppm below 2000 ppm, 100 ppm above 2000 ppmAccuracy:±2% full scale ±1 LSDSalinity range:
Resolution:
Accuracy:0 … 10000 ppm
100 ppm
±2 % of full scale ±1 LSDCalibration points:1 per parameterTemperature range:
Resolution:
Accuracy:0 … 50 °C
0.1 °C
±0.5 °C + 1 digitOperating temperature:5 … 45 °CDimensions (W x L x H):
Weight:45 x 170 x 30 mm
90 gPower supply:Incl. 4 batteries (A76 or LR44 equivalent)IP code:IP 67Warranty:1 year
Pocket Tester with waterproof housing for measuring conductivity, TDS, salinity, and temperature. Ideal for regular checks in industrial plants or swimming pools. With lanyard and clip on the device head.Three-colour LED lighting system (blue, green, red) and display symbols for easy handling3 multifunction buttons with symbolsUp to 3 calibration pointsWith stability indicator, auto-hold, and auto-off functionTransparent lid for measurement, calibration, and storage of the electrodeOptimised lid design for an upright and stable position of the testerBattery operation (4 x AAA batteries)Easy battery and electrode replacementConductivity:0.01 ... 20.00 mS/cmResolution:0.1 μS/cm, 1 μS/cm, 0.01 mS/cmAccuracy:±1 % FSTDS:0.01 ... 20.00 pptResolution:0.1 ppm, 1 ppm, 0.01 pptAccuracy:±1 % FSSalinity:0.01 ... 10 pptResolution:0.01 pptAccuracy:±1 % FS
Replacement electrode with two robust graphite electrodes for the Pocket Tester SD30 EC.Precise determination of conductivity, TDS, or salinityIntegrated NTC temperature sensor (reference temperature 25 °C)Low-maintenance and easy-care 2-pole graphite electrodes
Portable routine model for conductivity measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsEasy 1 point calibration with option of manual cell constant entry3 predefined standards and 1 user defined standardAutomatic, manual and time dependant endpoint recordingData memory storage for 200 data pointsPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulatorsScope of supply:S3-Meter: Includes instrument, electrode clip, operating instructions, quick guide, test certificate, declaration of conformity, batteriesS3-Standard kit: As S3-Meter, but also with InLab 738-ISM and sachets of conductivity standards 1413 µS/cm and 12.88 mS/cmS3-Field kit: As S3-Standard kit, but also with bottles for calibration, uGo™ carrying caseS3-Bioethanol kit: As S3-Field kit, but also with InLab 725 instead of InLab 738-ISMConductivity
Measuring range:
Resolution:
Accuracy:
0.010 µS/cm … 500 mS/cm
0.001 ... 1 (auto-range)
± 0.5%Temperature
Measuring range:
Resolution:
Accuracy:
-5.0 ... 105.0 °C
0.1 °C
±0.2 °CTDS (Total Dissolved Solids)
Measuring range:
Resolution:
Accuracy:
0.01 mg/l ... 300 g/l
0.01 ... 1 (auto-range)
±0.5 %Specific resistance
Measuring range:
0.01 ... 100.0 MΩcmSalinity
Measuring range:
0.01 ... 42 psu
Portable professional model for conductivity measurement.New, intuitive menu structure with fast and easy T-Pad navigationRobust design with IP67 protection for use in harsh and demanding environmentsIntelligent Sensor Management (ISM®) functionality reduces the risk of errorsNew sunlight-proof screen guarantees screen readability even in direct sunlightNew StatusLight gives a fast, visual confirmation showing if the meter is ready to measure or notOperating support for 12 languages with information shown in complete words and sentencesEasy 1 point calibration with option of manual cell constant entry3 predefined standards and 1 user defined standardAutomatic, manual and time dependant endpoint recordingData memory storage for 2000 GLP data points with weatherproof Micro-USB connection for data exportPower requirements: 4 x 1.5 V AA or 1.3 V NiMH accumulatorsScope of supply:S7-Meter: Includes instrument, LabX direct pH, USB cable, electrode clip, base accessory, operating instructions, quick guide, test certificate, declaration of conformity, batteriesS7-Standard kit: As S7-Meter, but also with InLab 738-ISM and sachets of conductivity standard 1413 µS/cm and 12.88 mS/cmS7-Field kit: As S7-Standard kit, but also with bottles for calibration, uGo™ carrying caseS7-USP/EP kit: As S7-Field kit, but with InLab 742-ISM instead of InLab 738-ISMSpecificationsConductivity
Measuring range:
Resolution:
Accuracy:
0.010 µS/cm ... 1000 mS/cm
0.001 ... 1 (auto-range)
±0.5 %Temperature
Measuring range:
Resolution:
Accuracy:-5,0 ... 105 °C
0.1 °C
±0.1 °CTDS
Measuring range:
Resolution:
Accuracy:
0.01 mg/l ... 600 g/l
0.01 ... 1 (auto-range)
±0.5 %Specific resistance
Measuring range:
0.01 ... 100.0 MΩcmSalinity
Measuring range:
0.01 ... 42 psuConductivity Ash
Measuring range:
0.01 ... 2022 %Dimensions (W x D x H):222 x 70 x 35 mm