Cooling circulator Variostat® for a variety of baths | Type: Variostat®

Prevents build-up of algae and bacteria in bath tanks providing hygienic operationNo contamination of the tank or immersion thermostat componentsEconomical - only 2 ml of Aqua Stabil is required for every 1 litres of waterRemains effective for weeks, as shown by colour indicator.Use biocides safely. Always read the labelling and the product information before use.

Test tube racks made of stainless steel.Suitable for heating circulators with the bath types BC4, BC6, B5, BT5 and refrigerated circulators with the bath types 200F, 201F, 300F, 310F, 450F.

Compact design and high cooling capacity at low temperatures.Option: Natural refrigerant available on requestHeating capacity CC-505 / CC-505wl: CC-508 to CC-525w: 1.5 kW 3.0 kWPump data CC-505 to CC-525w Max. pressure: Max. suction: 25 L/min / 0.7 bar 18.5 L/min / 0.4 barSupply requirement CC-505 to CC-508w: CC-510 to CC-525w: 230 V / 50 Hz 400 V / 50 HzTemp. stability acc. to DIN 12876:+/-0.02 K*with displacement insertFunction version available by E-grade.

Powerful circulator for routine and sophisticated low temperature applications in the laboratory. The TXF200-R52 includes the TXF200 heating circulator and an R52 tank/refrigeration unit. The refrigeration unit can be switched off independently of the circulator to allow heating-only applications.Full colour QVGA TFT displayTimer function with acoustic alarmMemory capacity for 10 programs with up to 100 segmentsChoice of languages: English, French, German, Spanish, and ItalianFloat switch protects against low liquid levelAdjustable over-temperature protectionNo spill valved front drainProgrammableTemperature range:-30 ... 100 °CTemperature stability:±0.1 °CFlow rate:22 l/minPump pressure:0.53 barRefrigerant:R404aTimer:1 min ... 99 h 59 min

Powerful circulators with strong heating and cooling power for operating temperatures from -25 °C to 200 °C. With speed-controlled pressure and suction pump, suitable for external applications. Very good thermal insulation, therefore particularly fast heating-up times and low heat input at low temperatures. All parameters can be read, monitored and documented via software.Connection for external Pt100 temperature sensor and external solenoid valves via Multi I/O connectionVisual and audible warning functionsUSB/RS 232 interfaceSafety drain valveAdjustable safety circuitCalibration optionCBC 5 basic With built-in LED display for controlling and monitoring the device parameters.CBC 5 control With removable TFT display for controlling and monitoring the device parameters. The display can be used as a remote control, e.g. in a fume hood.SpecificationsHeat output / cooling output: Power input:2500 W / 350 W 3000 WWorking temperature: Filing volume:-25 ... 200 °C 5 ... 7 lCooling agent:230 g R134ATemperature stability (CBC 5 basic // control):±0.02 °C // ±0.01 °CDisplay resolution (CBC 5 basic // control):0.1 °C // 0.01 °CPump flow rate:31 l/minClass / Identification acc. to DIN 12876: IP code:III / FL IP 21Dimensions (W x D x H): Power supply:275 x 490 x 690 mm 100-115 ... 230 V / 50 ... 60 Hz

Heated bath circulators with stainless steel bath for operating temperatures up to 250 °C. Easy switching between internal and external control. With integrated cooling coil and powerful pressure and suction pump in a housing made of temperature and chemical resistant plastic. The large surface of the radiator allowes for an optimum heat exchange, even heating of the medium and very fast heat-up times. The bath is easy to clean and has a drain valve with hose connection on the front for draining the bath. Can be operated with flammable liquids.Adjustable safety circuitSimple menu navigation with push buttons and rotary knobsVisual and audible warning functionsUSB/RS 232 interfaceHBC 5 / 10 basic With large, easy-to-read LED display.HBC 5 / 10 control With removable TFT display for controlling and monitoring the device parameters. The display can be used as a remote control, e.g. in a fume hood. With timer function. A solenoid valve can be connected.SpecificationsHeat output: Power input:2500 W 2650 WWorking temperature: Operating temperature min.:Amb. +10 °C ... 200 °C -20 °CTemperature stability (HBC 5/10 basic // control):±0.02 °C // ±0.01 °CDisplay resolution (HBC 5/10 basic // control):0.1 °C // 0.01 °CPump flow rate: Filing volume:31 l/min 5 ... 7 l // 8 ... 11 lClass / Identification acc. to DIN 12876: IP code:III / FL IP 21Dimensions (W x D x H) HBC 5 // HBC 10: Power supply:275 x 500 x 406 mm // 275 x 500 x 456 mm 100-115 ... 230 V / 50 ... 60 Hz

The compact refrigerated and heated circulators are renowned for their high energy efficiency and on-demand and speed-controlled compressor, which reduces noise and operating costs. The high-quality isolation of the 4 l bath allows fast heating and reduces heat input when cooling. Using the external temperature control circuit, it is possible to have up to 2.5 l thermofluid without a refill. The integrated hopper and drain valve ensure safe and clean handling of the thermofluid. The HRC 2 control in combination with an external temperature sensor is perfectly suitable to precisely temper external closed or open applications.Speed-controlled refrigeration systemSpeed-controlled pump (PEEK)Digital level indicatorInterfaces: RS 232 and USBHRC 2 control additionally:Remote control via Wireless Controller (WiCo)Simplified and automated processes through 10 freely programmable temperature ramps with 10 steps eachTimer/CounterDegassing functionAdjustable temperature safety circuitConnection of magnetic valves possible (Multi IO)Alarm contact (Multi IO)Connector for standby contact input (Multi IO)Connection for external PT100 temperature sensorSpecificationsHRC 2 basic // HRC 2 controlHeat output / cooling output (20 °C): Power input:1500 W / 400 W 1800 WWorking temperature: Filing volume:-20 ... 100 °C // -30 ... 100 °C 1.4 ... 4.0 lCooling agent:R134aTemperature stability:±0.1 K // ±0.05 KDisplay resolution:0.1 K // 0.01 KPump flow rate:21 lClass / Identification acc. to DIN 12876: IP code:III / FL IP 21Dimensions (W x D x H): Power supply:220 x 525 x 475 mm 230 / 115 V, 50 / 60 Hz

Refrigerated circulators are suitable for temperature control for internal and external applications. Operation is simple and intuitive via the central rotary knob on the front of the unit.3.5" TFT colour display with multilingual user interfaceIntegrated programmer for 8 x 60 program stepsEasy pump switching between internal and external circulationExternal pump connections (M16x1)Infinitely adjustable pressure pumpUSB connectionSpace-saving cooling coil design yields more usable space in the bath tankExternal Pt100 connectionStainless steel bath tank including bath lid and drain tapRemovable ventilation grid2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1Timer:0 ... 99 h 59 minTemperature stability:±0.01 °CHeating capacity:2 kWFlow rate:8 ... 27 l/minPump pressure:0.1 ... 0.7 bar

Refrigerated circulators are suitable for temperature control for internal and external applications. Operation is simple and intuitive via the central rotary knob on the front of the unit.3.5" TFT colour display with multilingual user interfaceIntegrated programmer for 8 x 60 program stepsEasy pump switching between internal and external circulationExternal pump connections (M16x1)Infinitely adjustable pressure pumpUSB connectionSpace-saving cooling coil design yields more usable space in the bath tankExternal Pt100 connectionStainless steel bath tank including bath lid and drain tapRemovable ventilation grid2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1Analogue interfaceTemperature stability:±0.01 °CHeating capacity:2 kWFlow rate:8 ... 27 l/minPump pressure:0.1 ...0.7 barTimer:0 ... 99 h 59 min

Refrigerated circulators are suitable for temperature control for internal and external applications. Operation is simple and intuitive via the central rotary knob on the front of the unit.3.5" TFT colour display with multilingual user interfaceIntegrated programmer for 8 x 60 program stepsEasy pump switching between internal and external circulationExternal pump connections (M16x1)Infinitely adjustable pressure pumpUSB connectionSpace-saving cooling coil design yields more usable space in the bath tankExternal Pt100 connectionStainless steel bath tank including bath lid and drain tapRemovable ventilation grid2 hose olives each suitable for hose inner diameter 8 and 12 mm includedClass III (FL) acc. to DIN 12876-1RS232 interfaceTemperature stability:±0.01 °CHeating capacity:2 kWFlow rate:8 ... 27 l/minPump pressure:0.1 ... 0.7 barTimer:0 ... 99 h 59 min