Cross bosshead, right-angle format, Aluminum alloy | Max. Ø rod: 13 mm
CHF 21.30*
Content:
1
20 Available. Delivery time: 5-7 workdays
Product number:
9224274
Manufacturer:
BOCHEM Instrumente GmbH
Length:
57 mm
Width:
38 mm
Height:
20 mm
Weight:
0.092 kg
* Specifications refer to the packaging unit
LABOMECA. With hexagon socket screw.
| Angle: | 90 ° |
|---|---|
| Material: | Aluminium alloy |
| Max. Ø rod: | 13 mm |
Other customers also bought
Carl Friedrich Usbeck KG
Swivelling bosshead
Swivelling. To DIN 12895 Part 1. Zinc die casting powder-coated .
Carl Friedrich Usbeck KG
Bossheads, zinc die casting, with brass screws
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
BOCHEM Instrumente GmbH
Bosshead
Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.
BOCHEM Instrumente GmbH
Bossheads, aluminium, angle 90°
DIN 12895. With thumb screw M8/M10.
Similar products
BOCHEM Instrumente GmbH
Bosshead
Malleable cast iron with lacquered chrome finish. DIN 12895. With lug screw.
Aluminium, powder-coated. With roller grips and bosshead for retort stand rods.
Carl Friedrich Usbeck KG
Bossheads, zinc die casting, with brass screws
To DIN 12895. Zinc die casting, powder-coated. For vertical and horizontal clamping.
Chrome plated cast steel. Suitable for frame works and fixing perpendiculars. Can be moved vertically and horizontally along the rods.
Double bosshead malleable iron, epoxy coated. With M8 brass thumb bolt.
For table tops with a thickness of max. 55mm. Rod diameter 12/13mm.
Customers also bought
Wall or bench mounting for 50 reagent bottles and 5 flasks.With drip channel and plastic covered feet.Dimensions (L x W x H): 360 x 130 x 650 mm.
Drying and heating chambers are suitable for routine drying and sterilisation tasks with homogeneous temperature distribution.High temperature accuracy thanks to APT.line™ technologyElectromechanical control of the exhaust air flapChambers up to 115 l are stackableErgonomic handle designUSB connection for data recordingClass 2 integrated independent adjustable temperature safety device (DIN 12880) with visual alarmWith forced convectionController with LCD display
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.Working temperature range:-40 ... 200 °C, to 10-5 mbarVapour pressure:0.00001 mbar
Non-slip Laboratory mats with 2 different sides for organising and thus simplyfying workflow processes. One side with a completely flat surface and one side with a combination of gridded and flat surface. The gridded area avoids unwanted movement of small partsIdeal for all laboratories and more specialised areas such as cold rooms or areas with high sterility requirements such as clean rooms. Dimensions (W x D x H): 305 x 379 x 2 mmProtection of the work bench from hot items up to 200 °CLip around the edge can hold approx. 250 ml of liquidReusableChemically resistantDishwasher safeFood safeNoise dampeningCan be rolled upAutoclavable at 121 °C for 15 minutes
Graduations and meniscus line of the burette are clearly visible. They can be used on support rods of 10 - 12 mm diameter.
