Cryo-Protection® Face Shield | Dimensions mm: 250 x 500 x 190
Cryo.Expert GmbH
CHF 113.40*
Content:
1
Delivery according to order confirmation
Product number:
6311307
Manufacturer:
Cryo.Expert GmbH
Length:
266 mm
Width:
255 mm
Height:
185 mm
Weight:
0.395 kg
* Specifications refer to the packaging unit
The injection molded polycarbonate clear shield is shaped to hug your chest and side of your face when in use, and pivots up and out of the way when your task is done. The padded head gear has a ratchet band in the back and a pin-and-lock system over the top for a 2-way adjustable fit. A lightweight design meets ANSI Z87.1 requirements, is CE Cat. II, and is impact resistant. The head gear also withstands cryogenic splashes.
| Dimensions mm: | 250 x 500 x 190 |
|---|---|
| Weight g: | 350 |
Similar products
Made of thick-walled silicone.Safe, non-slip protection against very hot or cold surfaces.Measures 10 x 19 cm with durable silicone rubber construction that remains flexible from -57 °C to +260 °C. End pockets accept thumb and fingers to grasp objects.Mitts have multiple studs with concave tips thus providing secure grip on virtually all hot/cold surfaces.
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.The original Waterproof CRYO-GLOVES® ensure safe handling of cryogenic liquefied gases. The Waterproof version is 100% waterproof and additionally equipped with a seamless, thermal inner glove that draws moisture away from the hands so that work can be carried out comfortably for longer periods.Caution: Not suitable for immersion in liquid nitrogen or other cryogenic liquids!
Very supple, offering excellent movement. Knitted construction, without seams. Temperature resistant up to 250 °C. 1 pair per pack. Cat. II
Thermal insulation due to double-knit cottonGood grip due to pebbled palmsChemical resistance to acids and aliphatic solvents1 pair per pack
Thin, anatomically-shaped glove ensures dexterityExcellent abrasion resistance: longer lastingDot embossing for better insulation and better gripCat. II
Gripper made of red silicone rubber to protect hands when handling hot or cold vessels. Suitable for temperatures from -50 °C up to 250 °C. Two grip openings for quick and easy use. One size fits all, can be used on both sides. With non-slip grip surface.
This coarse-knitted glove made of 100% Kevlar® is lined with cotton, making it ideal for protecting the wearer against heat and cuts.The combination of Kevlar® and cotton guarantees good heat insulation and enables the handling of objects up to +250 °C without losing anything in terms of cut resistance. 1 pair per pack.Characteristics:Very good protection against cut injuriesAdditional cotton claddingComfortable to wearApplications: metal processing, automotive industry, glass industry, foundries
For protecting hands and arms when working in very low temperatures down to approx. -196 °C. Available in wrist-, underarm-, elbow- and shoulder-length versions.For work in ultra-low freezersFor working with dry ice at -79° CWorking in the gas phase of liquid nitrogen (without direct contact with liquid nitrogen)According to EN 511, EN 420, EN 388, Cat.IIIPack of 1 pairAttention: Not suitable for immersion in cryogenic liquids.
Soft, pliant, all-cotton terry cloth gloves are superb for handling hot objects out of the autoclave or oven, or for other heat protection in the lab, school or industry. Note: Gloves are not waterproof and should not be used to handle dry ice.
Thermal protection glovesFlexible, knitted cuffsSpecial Grip & Proof nitrile coatingCold protection down to -10 °CComfortable to wear, dexterity and flexibilityColor: blue / black