Digital torque measurement
CHF 2,790.97*
Content:
1
Delivery according to order confirmation
Product number:
4676254
Manufacturer:
Kern & Sohn GmbH
Packaging information:
Length:
371 mm
Width:
323 mm
Height:
115 mm
Weight:
3.3 kg
Description
For torque testing of bottles and other packaging with screw tops. Quick pin system: The four bottle mounts are pushed in, instead of being screwed in, to save time. This allows you to reconfigure quickly for other bottle sizes.
Scope of supply: Digital torque measurement, four bottle mounts with rubber coat, sturdy carry case
- Can be used in both directions of rotation
- Metal housing
- Capacity display: A bar lights up to show how much of the measuring range is still available
- Peak hold mode to capture peaks
- Function to set limits: Input of an upper/lower limit value
- Visual and acoustic signal
- AUTO-OFF function
- Back-lit LCD graphic display
- Internal data memory saves up to 500 measurements
- Memory contents can be transferred to the PC using optional software
- USB and RS 232 data interfaces
- Rubber feet with anti-slip feature
Scope of supply: Digital torque measurement, four bottle mounts with rubber coat, sturdy carry case
Properties
| Depth: | 160 mm |
|---|---|
| Dimensions (WxDxH): | 260 x 160 x 60 mm |
| Height: | 60 mm |
| Manufacturer Article Number: | DA 5-3 |
| Max. measured value: | 5 Nm |
| Measured range: | 5 Nm |
| Readability: | 0,001 Nm |
| Type: | DA 5-3 |
| Type of auxiliary energy: | Rechargeable battery |
| Weight: | 3 kg |
| Width: | 260 mm |
Skip product gallery
Shore hardness testers, digital, HD
From
CHF 765.00*
Leeb hardness tester, mobile
From
CHF 1,991.55*
Leeb hardness testers, mobile, HMM, with printer
From
CHF 2,139.00*
Leeb hardness testers, portable, HMM
From
CHF 1,486.65*
Leeb hardness testers, portable, HMO
From
CHF 2,833.05*
Shore hardness testers, analogue, HB
From
CHF 222.00*
Leeb hardness testers, portable, HN-D
From
CHF 1,304.33*
Similar products
Compact handheld durometer for plastics with digital display.Measurement of penetration depth (Shore)Material thickness of the sample, min. 6 mmParticularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 48-4 are not possible because of very narrow standard tolerancesCan be attached to the test stands TI-ACL (for Shore A and Shore 0) and TI-DL (for Shore D)Large display with backlightSelectable: AUTO-OFF function or continuous operation, charge indicatorDelivered in a hard carrying caseShore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materialsShore 0: foams, spongesShore D: plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.
The Leeb hardness tester measures metallic samples and offers mobility and flexibility compared to stationary tabletop devices and testing devices with internal sensor.External impact sensorAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 600 data groupsMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (Type A, B, C), Vickers (HV), Shore (HS), Leeb (HL), Brinell (HB)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsMeasuring with tolerance range (limit-setting function):Upper and lower limiting can be programmedAcoustic and visual signalMatrix display: Backlit multi-function displayRobust metal housingScope of supply:HK-D: Mobile Leeb hardness tester, hard carrying caseHK-DB: Mobile Leeb hardness tester, hard carrying case, standard block for calibration, hardness approx. 800 HLD
Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness values.External impact sensor (Type D) includedAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionStandard block for calibration included (approx. 790 ± 40 HL)Internal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsDelivered in a hard carrying caseWireless IR printer included for on-site printing of measurement protocols (battery operated)
Advanced features for demanding applications.Impact (rebound) sensor: The bounce module is accelerated by a spring against the item being tested. Depending on how hard the object is, the kinetic energy of the module will be absorbed. The speed reduction will be measured and converted to Leeb hardness valuesAutomatic recognition of the impact (rebound) sensor connected to the HMMMobility: In comparison with stationary table-top devices and testing devices with an internal sensor, using the HMM offers the highest level of mobility and flexibilityAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to 9 data groups, with up to 9 values per group forming the average value of the groupMini statistics function: displays the measured result, the average value, the impact direction, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsAUTO-OFF function, battery level indicatorScope of supply:Leeb hardness tester, external impact sensor, standard block for calibration (approx. 790 ± 40 HL), carrying case
Portable Leeb hardness tester for professional applications.Innovative touchscreenAutomatic recognition of the impact (rebound) sensor connected to the HMOAll measurement directions possible (360°) thanks to an automatic compensation functionInternal memory for up to measurementsMini statistics function: Displays the measure value, the average value, the difference between the maximum and minimum values, date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa)Automatic unit conversion: The measuring result is automatically converted into all specified hardness unitsRechargeable battery operationUSB interface for connection to the printer and charging the batteriesScope of supply:Leeb hardness tester, carrying case, standard block, mains adapter
Compact handheld durometer for plastics with drag indicator.Measurement of penetration depth (Shore)Material thickness of the sample, min. 6 mmParticularly recommended for internal comparison measurement. Standard calibrations e.g. to DIN 48-4 are not possible because of very narrow standard tolerancesCan be attached to the test stands TI-AC (for Shore A and Shore A0) and TI-D (for Shore D)Max mode: Holds the maximum value in the displayPoint mode: Shows one instant valueScrews to screw on to the TI: M7 fine threadDelivered in a plastic carrying caseShore A: rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materialsShore A0: foams, spongesShore D: plastics, synthetic resin, Resopal®, epoxides, Plexiglas® etc.
Pen type hardness testing device in accordance with Leeb testing for mobile hardness testing of metals.LCD displayAll measurement directions possible (360°) thanks to an automatic compensation functionInternal impact sensor (Type D)Internal memory for up to measurements with date and timeMeasurement value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL)Rechargeable battery operationData interface USBScope of supply:Leeb hardness tester, carrying case, USB interface cable, mains adapter