Drum pumps, mains-powered | Type: Pump set Solvents
CHF 3,184.00*
Content:
1
Delivery according to order confirmation
Product number:
6285153
Manufacturer:
Lutz Pumpen GmbH
Weight:
11.9 kg
* Specifications refer to the packaging unit
For safe handling of environmentally hazardous and aggressive liquids as well as inflammable and explosive fluids.
Drum pumps supplied with: 230V motor, 5m cable and plug, pump tube and tubing connection. Explosion-proof version additionally supplied with earthing strap.
Pump set "alkalis"
For low-viscosity alkali solutions such as sodium chloride, Potassium hydrate, ammonia, formic acid and acetic acid.
Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapter
Pump set "acids"
For low-viscosity acids such as hydrochloric, phosphoric, chromic, citric acids and battery acid.
Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapter
Pump set "mineral oils"
For low-viscosity mineral oil products such as Diesel, fuel, hydraulic, machinery and motor oils.
Supplied with: Pump, 2.0m PVC tubing (DN25 fitting), aluminium nozzle and PP barrel adapter
Pump set "solvents"
For easily flammable hydrocarbons such as ethanol, gasoline, butanol, isopropanol, kerosene, methanol and petroleum.
Supplied with: Pump, 2.0m solvent-resistant tubing (DN19 fitting), brass conductive tubing coupling and nozzle, earthing strap and PP barrel adapter
Drum pumps supplied with: 230V motor, 5m cable and plug, pump tube and tubing connection. Explosion-proof version additionally supplied with earthing strap.
Pump set "alkalis"
For low-viscosity alkali solutions such as sodium chloride, Potassium hydrate, ammonia, formic acid and acetic acid.
Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapter
Pump set "acids"
For low-viscosity acids such as hydrochloric, phosphoric, chromic, citric acids and battery acid.
Supplied with: Pump, 2.0m PVC tubing (DN19 fitting), PP nozzle and barrel adapter
Pump set "mineral oils"
For low-viscosity mineral oil products such as Diesel, fuel, hydraulic, machinery and motor oils.
Supplied with: Pump, 2.0m PVC tubing (DN25 fitting), aluminium nozzle and PP barrel adapter
Pump set "solvents"
For easily flammable hydrocarbons such as ethanol, gasoline, butanol, isopropanol, kerosene, methanol and petroleum.
Supplied with: Pump, 2.0m solvent-resistant tubing (DN19 fitting), brass conductive tubing coupling and nozzle, earthing strap and PP barrel adapter
| Delivery head mWS: | 14 |
|---|---|
| Flow rate l / min.: | 95 |
| Immersion depth mm: | 1200 |
| Material: | stainless steel |
| Type: | Pump set Solvents |
Other customers also bought
Lutz Pumpen GmbH
Drum pumps, mains-powered
Lightweight and powerful pump for transferring small amounts of aqueous liquids up to 300 mPas from cans and drums with infinitely variable speed controller.Motor 230 V, 200 W (IP 24)Seal less pump tubeSuitable accessory flow meter requiredPump with tubing connectionTwo options:Polypropylene version for acids and alkalisStainless steel version for low-viscosity lubricantsAvailable as a set (9.880 310-9.880 315) with 1.5 m PVC tubing, nozzle in polypropylene, wall bracket.Set accessories: Lutz nozzle, 1.5 m PVC hose 3/4", hose connection, hose clamps, wall bracket (for pump B2 Vario PP-SL Ø 32 mm).
Similar products
When dispensing combustible/explosive liquids pump, both dispensing and filling drum involved in the process must be sufficiently earthed, in order to prevent ignition or explosion through electrostatic discharges. Antistatic set, includes three colour-coded connecting cables with clamps, supplied complete in plastic case.
For liquid flows down to 5 ml/sec. Wheel spins freely and speed of rotation is proportional to flow rate. Maximum recommended flow rate up to 95 ml/sec, max 2 bar pressure. Not to be used with corrosive fluids or over +85 °C. Can be used with gases.
For contamination-free removal of organic solvents and flavouring agents. Can be completely closed off with two ball valves so that no dangerous vapours can escape after dispensing. Electrostatic charge can be dissipated through the accessory antistatic set (please order separately).Medium-contacting parts are made of stainless steel (1.4301) and PTFEFor containers up to 60 litresSuitable for containers with R 2'' threadThe solvent pump for tinfoil canisters has a connector thread for pull-out spouts
Only the tube comes into contact with the liquid when the pumps are used, so that a great deal of liquid can be filled off. The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid.Good pump capacityFoodsafeDelivery tubes made of PPUniversal bungs made of soft PVC, for container openings of 30 – 70 mmFor weak acids, alkalis and detergents
For filling off high purity liquids such as solvents. Due to the barrel screw joint and the stopcock, the container and the pump can be hermetically sealed. Electrostatic charge can be dissipated through the accessory antistatic set (please order seperately).Medium-contacting parts made opf stainless steel (1.4301) and PTFEFor barrels up to 220 litres, immersion tube can be steplessly adjusted to the barrel depthSuitable for steel barrels with R 2'' thread
For rapid and clean emptying from cans, drums and small barrels up to 60L.Precise dosing, without drippingPump connection suitable for 64mm dia. (BSI) container threadsstepless length adjustment of immersion tubeThreaded adapters for most commercially-sold containers availableNot suitable for HCl
For decanting acids, caustic solutions and aggressive detergentsExcellent recovery of residual liquid in the barrel provided by base-sitting, non-return valve and steplessly adjustable immersion tubeFor barrels and tanks from 30 to 1000l.Type A: With rigid, angled, dispensing nozzle.Type B: With flexible, PVC dispensing hose and stopcock.Barrel screw joints and thread adapters for standard containers are available as optional accessories. Please order separately.Immersion tube diam.:32mmMax. pump capacity:up to approx. 12 L/min.