Filter bags Whirl-Pak®, PE, sterile, with round wire

All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.

Dimensions (WxH):	190 x 300 mm
Height:	300 mm
Manufacturer Article Number:	B01318WA
Material:	PE
Max. temperature resistance:	82 °C
Min. temperature resistance:	-210 °C
Nominal capacity:	1627 ml
Sterile:	Yes
Temperature resistance:	-210 ... 82 °C
Thickness:	0.102 mm
UNSPSC:	41104105
Width:	190 mm
With labelling field:	Yes

Variants table
Buy	Unit price	Content	Delivery time	Preview	Product number	Dimensions (WxH)	Height	Manufacturer Article Number	Nominal capacity	Width

Similar products

Sample bags Whirl-Pak®, PE, sterile

Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications. Available with or without write-on label. With integrated wire closing system. Temperature range: -210 to 82 °C.

From CHF 99.90*

Sample bags SteriBag, PE, sterile

Transparent. For samples from chemistry, pharmaceutical, food technology applications etc.Sterile, RNase, DNase and pyrogen-freeLeakproofType A: Without write-on panelType B: With write-on panel.

From CHF 220.00*

Sample bags/Homogenising bags Whirl-Pak®, PE, sterile

Sterile, solid bags for the homogenisation of liquids and solidsWith and without labelling strips

From CHF 164.00*

Sample bags Whirl-Pak®Stand-Up, PE, sterile, free standing

Easy sample handling due to the specially gusseted bottom which flattens out when the sample is placed inside, allowing the bag to stand up on its own. It works just like a bottle or beaker, however it cost less, is shatterproof and uses a fraction of the storage space. The integrated wire closing system ensures the tightness of the sample bag. With write-on label for clean and easy identification. Temperature range: -210 to 82 °C.

From CHF 159.00*

Filter bags Whirl-Pak®, PE, sterile

From CHF 337.60*

Sampling bags, RollBag®, HDPE

Sterile sampling bags with a sticker closure for the collection of any liquid and solid samples.100 % metal freeWaterproof, resistant closureWith labeling fieldSingle, sterile packagingFilm in PolySilk®Gamma ray sterilisationFood safe

From CHF 122.00*

Sample bags SteriBag StandUp, PE, sterile, with write-on panel

Transparent. For samples from chemistry, pharmaceutical, food technology applications etc. SteriBag StandUp stable and able to stand on its own without a separate stand or support, leaving both your hands free to take the sample and fill the bag.Sterile, RNase, DNase and pyrogen-freeLeakproof

From CHF 181.00*

Special sample bags Whirl-Pak®, black

Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.Temperature range -210 to 82 °C.Made of black pigmented PE-film providing maximum protection for samples that are sensitive to light.

From CHF 200.40*

Sample bags Whirl-Pak® Speci-Sponge®, with cellulose sponge (dry)

For environmental surface sampling of work areas and equipment. The natural cellulose dry sponge is free of bactericides and has been tested to be non-inhibitory.For environmental surface sampling of work areas and equipment. The natural cellulose dry sponge is free of bactericides and has been tested to be non-inhibitory.

From CHF 262.00*

Sample bags Whirl-Pak® Stand-Up Thio-Bags®, sterile, free-standing

These bags are specially designed for sampling chlorinated water for example for Legionella testing. Each sterile bag contains a nontoxic, nonnutritive tablet containing active sodium thiosulfate to neutralise chlorine at the time of collection. The bag is EPA approved and has the additional benefits of saving time, utility costs, storage space, disposal costs, and replacing sample containers. With Write-On strip for clean and easy identification. Temperature range: -210 to 82 °C.These bags are specially designed for sampling chlorinated water for example for Legionella testing. Each sterile bag contains a nontoxic, nonnutritive tablet containing active sodium thiosulfate to neutralise chlorine at the time of collection. The bag is EPA approved and has the additional benefits of saving time, utility costs, storage space, disposal costs, and replacing sample containers. With Write-On strip for clean and easy identification. Temperature range: -210 to 82 °C.

From CHF 83.30*