Gas leak detection fluid, canister with cock
Otto Fahsig GmbH
CHF 167.60*
Content:
1
Delivery according to order confirmation
Product number:
6227949
Manufacturer:
Otto Fahsig GmbH
Packaging information:
Length:
461 mm
Width:
268 mm
Height:
315 mm
Weight:
20 kg
Description
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.
Spray head not included. Please order separately.
Spray head not included. Please order separately.
Properties
| Manufacturer Article Number: | 1-3200 |
|---|---|
| Nominal capacity: | 20 l |
| UNSPSC: | 41-11-19-00 |
Skip product gallery
From
CHF 9.30*
Other customers also bought
Otto Fahsig GmbH
Otto Fahsig GmbH
Gas leak detection fluid, bottle
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Skip product gallery
Rust remover Evapo-Rust®
From
CHF 36.70*
Multioil NSF H1
From
CHF 24.60*
Multifunctional oil 5-56 + PTFE
From
CHF 29.30*
Silicone oil, ISOLIER 72
From
CHF 29.30*
Gas leak detection fluid, bottle
From
CHF 9.30*
KÄLTE 75 SUPER
From
CHF 46.30*
Similar products
Evapo-Rust® removes rust safely and effectively without scrubbing or sanding. Simply immerse the rusted object into the rust remover.Water-solublepH-neutralEasily biodegradable (68.9 %) according to OECD 301BReusable with long-lasting effectivenessNo fumes or bad odoursNon-toxic, non-caustic and non-corrosiveDoes not affect plastic, PVC, Viton and non-oxidized lacquers
Multifunctional oil for food technology. The high-purity oil is registered for food technology in the highest NSF category H1 and can even be used if food contact cannot be excluded completely. MULTI OIL is colorless, odorless, silicone-free and temperature-resistant up to 150 ° C.lubricates, solves and protectsuniversally applicable in food technology
Multifunctional oil with PTFE for lubrication, loosening, cleaning and protection. Ensures permanent wear protection, high pressure absorption capacity and reliable lubrication even under extreme conditions. Allows either surface spraying or spot-precise spraying.High quality mechanic oilSilicone-freeTemperature range: -50 to 150 ° C
A high-quality, silicone-based, viscous, insulating oil, prevents spark discharge, stops leakage current and eliminates corona effect. It is water-repellent and therefore very effective as a moisture protector with excellent dielectric properties. Can be used at temperatures from -50°C to +200°C.
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Instant cooling of parts. Cooling agent for thermal fault location. Provides an instant solution by cooling down circuitry to -50°C. Intermittent short circuits or interruptions in condensors, resistors, integrated circuits are quickly discovered. Especially designed for applications where 100 % safety is an absolute must. The fluid evaporates very quickly and, in doing so, extracts heat of vaporisation from the environment. As a result, the sprayed surface cools down considerably (max. - 55°C). The spray evaporates completely and leaves no residues. It does not contain CFC's.