Heat sealers polystar® 243 | Type: polystar® 243
CHF 1,410.97*
Content:
1
Delivery according to order confirmation
Product number:
6200231
Manufacturer:
Rische + Herfurth GmbH
Length:
581 mm
Width:
180 mm
Height:
290 mm
Weight:
4.291 kg
* Specifications refer to the packaging unit
For welding all polyethylene, polypropylene, cellulose or polyamide foils up to a thickness of 2 x 0.25 mm. Expandable with a plug-in table and a film roll-off device. M model sealers have an additional holding magnet as well as a welding and cooling automatic.
*M-models
| Specifications | |
| Sealing length: | 250 mm |
| Sealing width: | 1.5 mm |
| Power consumption: Power output: | 0,6 A / 1,2 A* 0,14 kWh / 0,28 kWh* |
| Dimensions: | 420 x 120 x 135 mm |
| Power supply: | 230 V, 50 Hz |
*M-models
| Description: | With cutting device |
|---|---|
| Type: | polystar® 243 |
Similar products
Tip
Can be stretched up to 200 % and clings around irregular shapes and surfaces. Parafilm® M is resistant to many polar substances such as saline solutions, inorganic acids and alkaline solutions for up to 48 hours (After this time it may become brittle).Melting temperature:60 °CContinued use temperature:-45°C ... 50 °CStretching ability:200 %
Transparent. PE. With rim channel seal that can be opened and closed repeatedly.
Suitable for many laboratory applications. Resistant to liquids and gases. Ideal for sealing and wrapping of bottles and flasks. Good thermal conductivity, heat resistant.
DescProtect is a durable paper which quickly absorbs liquid spills. The PE-coated base layer stops liquids reaching the work surface.Stays flat, does not ripple or curl to de-stabilise vesselsWhite surface can be written on using pens or pencilsRapid absorption of liquid spillsExcellent fluid protectionNo contamination of work surfaces or laboratory cabinetsSuitable for school laboratories, wet chemistry, industrySurface protection paper with two layers:Layer 1: Highly absorbent carrier paper, sucks up spilled toxic or radioactive liquids quicklyLayer 2: Wetness impermeable polyethylene layer, protection for lab workbenches, trays or chemical cabinetsAdditional advantages: impermeable cover in animal cages, ideal in humidity chambers for atmospheric regulationThickness:0.24 mmWeight:125 g/m2Absorption:170 g/m2
Transparent. PE. With rim channel seal that can be opened and closed repeatedly, and write-on patch.
For transporting or keeping food fresh.TearproofHeat resistantEasy handling by tear-off sawAlso available extra wide
Embossed pure aluminium foils, extremely tare resistent.Handy for everyday useHeat-resistant up to 600°CAir-tight and a barrier to lightDimensions (sheet): 230 mm x 270 mm200 sheets in a box
