High-temperature chamber furnaces with SiC rod heating LHTC/LHTCT
CHF 17,436.00*
Content:
1
Delivery according to order confirmation
Product number:
9764592
Manufacturer:
Nabertherm GmbH
Packaging information:
Weight:
80 kg
Description
These powerful laboratory muffle furnaces are available for temperatures up to 1600 °C. The durability of the SiC rods in periodic use, in combination with their high heating speed, make these furnaces the all-rounders in the laboratory.
Option:
Height plus max. 255 mm for the open LHTCT models.
External dimensions vary for versions with additional equipment. Dimensions on request.
- Working Temperature 1500 °C (for models LHTC ../16), increased wear and tear of heating elements must be expected in case of working at higher temperatures
- Insulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2
- Housing made of sheets of textured stainless steel
- Dual shell housing for low external temperatures and high stability
- Furnace room lined with durable fiber material, not classified
- Optional flap door (LHTC) which can be used as work platform or lift door (LHTCT) with hot surface facing away from the operator (HTCT 01/ only with lift door)
- Switching system with solid-state-relays, power tuned to the SiC rods
- Controller is the programmable C 550 with adjustable ramps and holding times
- Easy replacement of heating rods
- Adjustable air inlet opening, exhaust air opening in the roof
- 400 V 3/N/PE 50/60 Hz connector as standard
Option:
- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
- Square saggar for charging of up to three layers
- Lid for top saggar
- Manual or automatic gas supply system
- Process control and documentation via VCD software package for monitoring, documentation and control
Height plus max. 255 mm for the open LHTCT models.
External dimensions vary for versions with additional equipment. Dimensions on request.
Properties
| Depth int.: | 290 mm |
|---|---|
| Ext. depth: | 625 mm |
| Ext. height: | 540 mm |
| Ext. width: | 490 mm |
| External dimensions (WxDxH): | 490 x 625 x 540 mm |
| Height int.: | 170 mm |
| Int. width: | 170 mm |
| Internal dimensions (WxDxH): | 170 x 290 x 170 mm |
| Manufacturer Article Number: | LC084K6ON8 |
| Max. temperature: | 1600 °C |
| Max. voltage: | 400 V·3/N/PE |
| Nominal capacity: | 8.0 l |
| Power supply: | 400 V·3/N/PE, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Rated capacity: | 13.0 kW |
| Type: | LHTC 08/16/C550 |
| Type of door: | Flap door |
| Weight: | 58 kg |
Skip product gallery
Muffle furnaces SNOL 6.7/1300, up to 1300 °C, Omron E5CC controller
From
CHF 2,943.00*
Muffle Furnaces Series LE 1/11 - LE 24/11 up to 1100 °C
From
CHF 1,891.00*
Muffle furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
From
CHF 1,601.00*
Muffle furnaces SNOL 8.2/1100, up to 1100 °C, Omron E5CC controller
From
CHF 1,781.00*
Muffle furnaces SNOL 13/1100, up to 1100 °C, Omron E5CC controller
From
CHF 2,517.00*
Muffle furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
From
CHF 3,327.00*
Ashing furnaces SNOL 3/1100, up to 1100 °C, Omron E5CC controller
From
CHF 4,068.00*
Ashing furnaces SNOL 22/1100, up to 1100 °C, Omron E5CC controller
From
CHF 7,152.00*
Ashing furnaces SNOL 39/1100, up to 1100 °C, Omron E5CC controller
From
CHF 9,271.00*
Similar products
Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalCeramic bottom plateControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)
Compact muffle furnaces with dual shell furnace housing of rust-free stainless steel and heating elements encased in quartz glass tubes.Tmax 1100 °C, working temperature 1050 °CHeating from two sides from heating elements in quartz glass tubesMaintenance-friendly replacement of heating elements and insulationInsulation only made of materials that are classified as not carcinogenic acc. to TRGS 905, class 1 or 2Housing made of sheets of textured stainless steelDual shell housing for low external temperatures and high stabilityFlap door which can also be used as a work platformExhaust air outlet in rear wallCompact dimensions and light weightController mounted under the door to save spaceEquipped with the basic controller R 7 with one free storeable temperature, which is dwelled until the controller is switch offStandard power supply 230 V, 1/N/PE, 50/60 HzExternal dimensions vary for versions with additional equipment. Dimensions on request.
Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalCeramic bottom plateControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)
Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalCeramic bottom plateControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)
Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalCeramic bottom plateControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)
Muffle furnaces with fibre-insulated chambers and ceramic heating plates. Suitable for thermal treatments in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalCeramic bottom plateControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)
Ashing furnaces with muffle chamber made of ceramic fibres and exhaust chimney. Suitable for applications in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalExhaust chimney with fanControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)
Ashing furnaces with muffle chamber made of ceramic fibres and exhaust chimney. Suitable for applications in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalExhaust chimney with fanControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)
Ashing furnaces with muffle chamber made of ceramic fibres and exhaust chimney. Suitable for applications in industry, science and medicine.Side, top or down-opening door depending on modelOuter casing made of powder-coated sheet metalExhaust chimney with fanControl panel in the lower part of the ovenIncl. door safety switchFast heating timeGood stability and temperature distributionLow power consumptionWith basic temperature controller Omron E5CC with adjustable temperature and time (not programmable)