ISE calibration standards Orion

Manufacturer Article Number:	941706
Package contents:	475 ml
Type:	Chloride + Sodium Standard, 0.1 M

LLG-Conductivity Solutions

Values stated at 25°C: Accuracy ±1%Directly traceable to NISTCertificate including actual value, expiration date and uncertainty of measurementThe safety data sheets of these products are available under www.llg-labware.com.

From CHF 27.40*

Conductivity standards, ISO 17025

Conductivity standards tested and ISO 17025 certified at 25 °C. Uncertainty of measurement of ± 1%. Directly traceable to N.I.S.T. Temperature dependence data is printed on the label as are lot numbers and expiry dates. Supplied in 500 ml HDPE bottle. 1.3 µS/cm in 250 ml bottle. Calibration values 84, 147, 1413, 12880 µS/cm. Control Values 1.3 - 350000 µS/cm.*1.25 - 1.35 µS/cm at 25 °C.

From CHF 60.70*

Conductivity standards

From CHF 37.40*

Conductivity calibration solutions

Disposable bags for effective calibration. Traceability according to NIST.

From CHF 92.40*

Orion™ calibration standards and TISAB solutions for ISE fluoride electrodes

Calibration standards ensure measurement accuracy. TISAB (Total Ionic Strength Adjustment Buffer) solutions are used to adjust the ionic strength for fluoride measurements.

From CHF 144.60*

Calibration and test material for conductivity measurements

Test resistors and calibration solutions to test the meters with conductivity function as well as to calibrate the system from the device and conductivity measuring cellOptimal measuring safety by PTB/NIST traceable standard solutionsEasy device check by highly precise test resistorsPharmacopeia conforming test kits

From CHF 163.00*

Cleaning and storage solutions for pH electrodes

These solutions prolong life and restore performance of pH electrodes or are used for storage and cleaning.Cleaning solutionsCleaning solution A for removing protein contaminantsCleaning solution C for general cleaningCleaning solution D for removing oil and grease contaminantsSolutions are delivered with a small beaker and a plastic pipette.Storage solutionsEnsure the proper function of pH electrodes even after prolonged storage

From CHF 76.47*

Conductivity standards

For calibration of conductivity meters and electrodes. NIST traceable. Accuracy ±0.5% at 25 °C.

From CHF 21.80*

Standards and storing solutions for ammonia ISE electrodes

For ammonia ISE electrodes 9512BNWP and 9512HPBNWP.

From CHF 127.45*

ORION™ conductivity and TDS standards

For calibration of conductivity and TDS testers.All standards are NIST™ traceableWhen using the automatic calibration function on ORION™ software, the programmed temperature tables can be used

From CHF 85.47*

Hazardous Substance Data
P-Satz	P202
SDS	Link

ISE calibration standards Orion™