In-Line Filter holder, PC | Filter diam. mm: 50

The filter holder made of PC is suitable for filtration of aqueous solutions. The bell-shaped base part protects the filtrate from contamination. Hose nipples can be replaced by Luer connectors to use as syringe filter holder.

  • Suitable for Ø 50 mm filter

  • Connection to peristaltic pump or pressure container possible

  • M 12x1 female thread

  • Max. operating pressure 7 bar

  • Autoclavable

colorpicker
Colour: Clear
Connection: M 12x1
Filter diam. mm: 50

Similar products

LLG-Inline filters, PTFE
LLG-Inline filters with PP housing. The PTFE membrane is particularly suitable for filtration of aggressive chemicals, including acids and non-aqueous solutions. Also ideal for clarifying filtration of organic solutions, sterile filtration of gases, as well as sterile aeration and deaeration.Multiple autoclavable at 121 °C for 20 minutes at 2 bar, max. 3 cyclesHigh throughput with low pressure dropFor air and gases in both directions
From CHF 95.00*

In-line filters Midisart® 2000
For sterile ventilation of fermenters, culture vessels, etc. or to act as a water barrier between the suction flask and the vacuum pump in filtration applications. The supported PTFE membrane within a PP housing gives excellent chemical resistance. Filter in either direction (3 bar max. pressure).Stepped horse-barb of 6-12 mm on either sidessterile single packed filters, autoclavable
From CHF 158.40*

In-Line-Filter, disposable, Polydisc TF™
Mounted in a robust PP housing. All have a low hold-up volume. Dimensions: (diameter x length) 53 x 46mm.Connections: For 6mm to 10mm diameter bore tubing. Also accept male luer slip.Hydrophobic PTFE membranePore sizes 0.1µm, 0.2µm, 0.45µm, 1.0µm1µm pore size unit has a PP prefilterAutoclavable at 131°C for 20 minutesMaximum operating pressure 4.0 barSuitable for chemically aggressive solutions, reagents and organic solvents. Ideal for protective venting, in-line filtration and isolation applications. Non-sterile.
From CHF 212.20*