Incubated and Refrigerated Floor Shakers MaxQ 436 HP/481 HP | Type: MaxQ 436 HP
CHF 20,220.00*
Content:
1
Delivery according to order confirmation
Product number:
9721207
Manufacturer:
Thermo Elect.LED GmbH (Kendro)
* Specifications refer to the packaging unit
Thermo Scientific MaxQ HP Incubated and Refrigerated Floor Shakers Models provide HEPA filtration for maximum protection from contamination, a directed airflow system for optimum temperature uniformity and ideal growth conditions, even when the units are full, and an ergonomic design for easy access to your product.
- HEPA filtration for maximum protection from contamination
- Crevice-free, stainless steel interior with coved corners for easy cleaning
- At-a-glance monitoring of time, speed, and temperature
- Foot pedal opens lid for hands free operation
- Angled sides, lower front, and convenient platform height ensure a comfortable reach into the chamber
- Thermal pane window provides a large viewing area
- Drain system with valve makes it easy to eliminate liquid, reducing the risk of water borne contamination
- Access port in rear of cabinet allows insertion of probes, CO2 gassing manifolds or other equipment
| Accuracy temperature: | ±0.1 °C |
|---|---|
| Accuracy temperature Number: | 0.1 °C |
| Depth: | 762 mm |
| Depth moving table: | 457 mm |
| Dimensions (WxDxH): | 1,143 x 762 x 1026 mm |
| Height: | 1026 mm |
| Max. loading capacity: | 32 kg |
| Max. permitted ambient temperature: | 40 °C |
| Max. relative humidity rate: | 80 % |
| Max. speed: | 525 1/min |
| Max. temperature: | 60 °C |
| Max. voltage: | 230 V |
| Min. permitted ambient temperature: | 18 °C |
| Min. speed: | 25 1/min |
| Min. temperature: | +5 °C |
| Moving table (WxD): | 749 x 457 mm |
| Permitted ambient temperature: | 18 ... 40 °C |
| Plug type: | EU |
| Power supply: | 230 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Shaking stroke: | 25 mm |
| Speed: | 25 ... 525 1/min |
| Temperature: | RT+5 ... 60 °C |
| Temperature addition: | RT |
| Type: | MaxQ 436 HP |
| Width: | 1143 mm |
| Width moving table: | 749 mm |
| With timer: | Yes |
Accessories
Thermo Elect.LED GmbH (Kendro)
Adhesive Flask Mat for MaxQ / MaxQ HP Shakers
Our Adhesive Flask Mat is an alternative to flask clamps for securing odd shaped objects such as bottles, volumetric flasks and test tube racks to a shaker platform. Simply place the 21 cm x 21 cm Adhesive Flask Mat on an anodised aluminum or stainless steel shaker platform and secure the vessel to it. It will hold Erlenmeyer flasks as large as 4 l that contain 2 l of media at speeds up to 250 rpm.The mat is not suitable for use in water baths.Easy-to-view samples. The white background makes it easy to determine when to harvest your samplesSimple to clean. Can be restored to like new condition by wiping with alcoholLong lasting. Months of use without losing adhesive properties
Similar products
Clamps for safe shaking of Erlenmeyer flasks.
Clamps for Erlenmeyer flasks, Media bottles* and Fernbach flasks**. Incl. screws for easy attachment to platforms. Clamps for flasks with 50 ml and higher are supplied with a spring to hold the flask in place.
Electronically controlled and programmable shakersSlow, soft-start greatly decreases the risk of spillsErlenmeyer flasks, beakers, culture flasks and micro plates can easily be fixed using 8 rubber stripsDigital LCD display for speed and run time controlIntegrated overload shutdownPermanent motor feedback, which automatically adjusts the speed even if the load is changed during operationContinuous mode or timer for up to 49 hoursSoft rubber feet minimise system movementPlatform with non-slip surfacePlatform capacity:Erlenmeyer Flasks e.g.: 25 x 50 ml, 16 x 125 ml, 9 x 250 ml, 4 x 500 ml, 4 x 1000 ml, 1 x 2000 mlBeakers e.g.: 36 x 50 ml, 25 x 100 ml, 16 x 250 ml, 9 x 400 ml, 4 x 1000 mlDeep well assay plates e.g.: 6 x standard (more if stacking is an option)Supplied with: Orbital Shaker incl. universal attachment, universal power supply, non-slip rubber mat and 8 elastic ties
New
Stainless steel shaker with orbital shaking motion was specially designed for use in incubators with up to 20 % CO2 concentration and 95 % humidity. This shaker is therefore ideal for the development of cell cultures.Timer 1 s to 99 h 59 min or continuous operationExternal control unit with digital display for operation outside the incubatorScope of supply: Shaker incl. basic platform with rubber mat and external control unitDue to the ribbon cable, a feed-through in the incubator is not necessary.
For orbital shaker Ika KS501 digital and reciprocating shaker Ika HS501 digital.AS 501.1 Universal attachmentFor a variety of vessels (flasks, beakers etc.) with volumes of at least 50 ml (ideally greater than 250 ml). With tension rollers that can be mounted on 2 levels.Usable area: 420 mm x 420 mm.Dimensions (W x D x H) 480 mm x 500 mm x 120 mm. Weight: 4000 g.AS 501.4 Gridded clip attachment(Without spring clips). For shaking round bottom, flat-bottom, pear-shaped, volumetric and erlenmeyer flasks etc. Minimum volume 25 ml. Dimensions (W x D x H) 475 mm x 460 mm x 95 mm, weight 2640 g.Capacity: Number of fixing clips (volume held) 110 x AS 2.1 (25ml), 55 x AS 2.2 (50 ml), 35 x AS 2.3 (100 ml), 16 x AS 2.4 (250 ml), 12 x AS 2.5 (500 ml), 8 x AS 2.6 (1000 ml)AS 501.5 Dish attachmentFor the gentle movement of petri dishes, but also suitable for gentle mixing in vessels with large, flat bottoms (wide mouth erlenmeyers, beakers). Fitted with a non-slip, plastic mat.Dimensions (W x D x H) 450 mm x 450 mm x 45 mm.Usable area: 420 mm x 420 mm, weight 1120 g Further accessories on request.* Clips AS 2.1 (9.838 091), AS 2.2 (9.838 092), AS 2. 3 (9.838 093), AS 2.4 (9.838 094), AS 2.5 (9.838 095) please order separately.
New
Compact, low-level, platform shaker with highly effective, orbital motion, maximum capacity 7.5 kg. Large selection of attachments enable use with a wide variety of vessel shapes and sizes. Electronic speed control and timer adjustment.Attachments are not included - Please order separately.Separate digital speed and timer displays with operating mode indicationTimer: 1 min to 99 h 59 min or continuous operationControlled stop-point positioning function (enables use in automated robotic sampling routines)All functions can be controlled and documented using labworldsoft® softwareInterface: RS 232 / analogueSpecial variant with reverse rotation function available on request
Powerful and efficient microprocessor controlled, multi-functional orbital shaker providing all that is required to mix your samples: rotation, reciprocation and vibration. This enables optimisation of the mixing whether in flasks, beakers, Petri dishes or other laboratory vessels.Orbital motion, orbital reciprocation and vibration functions all in one productReciprocal rotation: 0 to 360° turning angle, in 30 degree stepsVibration: 0 to 5° turning angle, 1 degree stepsLoading capacity: 8 kgFully programmable sequence that can use one or all the functions6 interchangeable platforms for vessels up to 1000ml including a multi-level platform to hold a large number of various microplates, Petri dishes and culture bags.Scope of supply: Orbital Shaker PSU-20i, external power adapter, manual and certificate.Optional Platform attachments please order separately.SpecificationsType of movement:orbital / reciprocal / vortexOrbit:20mm / 0 to 360° / 0 to 5°Speed range:20 to 250rpmMax. Load:
Timer:8kg
1min to 96hPermissible ambient temperature:4 to 40°CDimensions (W x D x H):410 x 410 x 130mmWeight: 11.7kgPower supply:240V, 50/60Hz