Infrared burner PowerCube IRB2
CHF 870.00*
Content:
1
Delivery according to order confirmation
Product number:
9018699
Manufacturer:
Edmund Bühler GmbH
Packaging information:
Length:
259 mm
Width:
258 mm
Height:
282 mm
Weight:
2.4 kg
Description
Laboratory heating device for the safe, rapid heating of large samples. Can be used anywhere, even where standard burners with an exposed flame cannot be used.
- Heats up quickly, constant heating
- No open flames, no soot, odourless
- Integral continuous electronic power adjustment between 0% and 100%
- Casing safe to touch even when hot
- Built-in casing handles for safe transport
- Inert ceramic, long-life heating element
- Built-in overheat monitor
- Protection of electrical components against spilled liquids
- Additional side safety shield on burner element
- Includes four-arm support for flat bottom containers. By using an accessory bracket the burner can be mounted on a tripod
| Specifications: | |
| Connector: | 800W / 230V |
| Dimensions (W x D x H): | 150 x 150 x 170mm |
| Weight: | approx. 2.5kg |
| Max. temperature: | 900°C |
| Heated area: | 100 x 100mm |
Properties
| Manufacturer Article Number: | 6063 000 |
|---|---|
| Type: | PowerCube IRB 2. 800 W / 230 V |
Skip product gallery
From
CHF 35.00*
Accessories
Edmund Bühler GmbH
Edmund Bühler GmbH
Tripod bracket for Infrared burner PowerCube IRB 1 / IRB 2
Tripod bracket for mounting the PowerCube into a tripod stand. With stainless steel rod approx. 13cm long.
Skip product gallery
From
CHF 501.00*
Other customers also bought
Edmund Bühler GmbH
Edmund Bühler GmbH
Infrared burner, PowerCube IRB1
The PowerCube is suitable for all rapid, non-contact heating activities in laboratories, industry and education. Reagent bottles, flasks or dishes, depending on their size, can be placed directly on the support trivet over the heating element or attached to a stand mounting.Advantages:Particularly safe as no open flame is usedStable thanks to practical cube shape. The casing itself only gets slightly hot in useAccelerated heating-up rate in comparison with other electrical heating devicesHeating element sealed in ceramic, therefore insensitive to external influences (spillages)Low operational cost due to the long life heating element and low power consumption of only 200 W, in spite of high temperatures of 700°CSpecifications:Heating power:250 WOverall (W x D x H):100 x 105 x 105 mmWeight:approx. 700 gMax. temperature:700 °CHeated area:60 x 60 mm
Skip product gallery
Gas cartridges
Price on request
Bunsen burner, portable, Labogaz® 470
From
CHF 90.40*
Teclu burners with needle valve
From
CHF 182.00*
Gas cartridge
From
CHF 10.80*
Bunsen burner, portable Labogaz® 206
From
CHF 118.50*
Cartridge burner DIN type with cartridge
From
CHF 74.50*
Teclu burners with needle valve
From
CHF 65.50*
Similar products
C 206 GLS pierceable cartridgePiercing cartridge with integrated gas lock system according to EN 417: 2012. For bunsen burner without safety valve. For bunsen burners Labogaz® 206 and Soudogaz blow torches.CV470 Plus and CV 300 Plus valve cartridgeWith safety valve. For bunsen burner Labogaz® 470.CV 360 valve cartridgeWith safety valve. For gas-safety burner schuett phoenix (Cat.-No. 9.018 761).Safety valve allows removal of partially used valve gas cartidges.
For operation with gas cartridges CV 300 Plus (Cat.-No.: 6.243 905) or CV 470 Plus (Cat.-No.: 9.018 512).
DIN 30665. Ignition protection, thermocouple, air regulation, low flame.
220g / 400ml. With safety valve. Provides approx. 3 hours use. EN 417: 2012. 70 % butane, 30 % propane.
For operation with gas cartridge C 206 GLS (Cat.-No.: 9.018 520). DVGW-authorised.
With needle gas valve and air regulator.Only for the gas cartridge 9.018 364.
Acc. to DIN 30665, with air regulation, with low flame.Please order safety base (shown in image) separately.