Ion selective combination electrodes perfectION™
CHF 1,770.00*
Content:
1
Delivery according to order confirmation
Product number:
6240856
Manufacturer:
Mettler-Toledo Online GmbH
Packaging information:
Length:
317 mm
Width:
159 mm
Height:
60 mm
Weight:
0.314 kg
Description
With integrated reference electrode. Easy cleaning of the diaphragm between measurements with Click & Clear™ (except Na electrode): by pressing the electrode head, the electrolyte solution flows through the diaphragm. The electrolyte can be easily emptied and refilled. Optimum contact between sample and electrolyte solution is always guaranteed.
Scope of supply: Sensor with permanently connected 1.2 m cable with BNC connection, 60 ml reference electrolyte, operating instructions
Scope of supply Na-electrode: Sensor with S7 plug head, diaphragm made of glass with higher sensitivity to sodium, 25 ml reference electrolyte, operating instructions
Scope of supply: Sensor with permanently connected 1.2 m cable with BNC connection, 60 ml reference electrolyte, operating instructions
Scope of supply Na-electrode: Sensor with S7 plug head, diaphragm made of glass with higher sensitivity to sodium, 25 ml reference electrolyte, operating instructions
Properties
| Cable length: | 1.2 m |
|---|---|
| Connection plug: | BNC |
| Ion concentration (ISE): | 5 x 10-5 ... 1 mol/l Cl |
| Manufacturer Article Number: | 51344706 |
| Material shaft: | Epoxy |
| Max. temperature: | 80 °C |
| Membrane: | Solid state |
| Min. temperature: | 0 °C |
| Shaft length: | 120 mm |
| Shaft Ø: | 12 mm |
| Temperature: | 0 ... 80 °C |
| Type: | perfectION™ comb Cl |
Skip product gallery
Fluoride electrodes
From
CHF 1,220.72*
Ion selective, gas-sensitive electrodes
From
CHF 645.00*
Ammonia gas sensing ISE Electrode
From
CHF 1,250.22*
High performance ammonia ISE Electrode
From
CHF 1,307.42*
Ammonia combination electrode with screw plug head
From
CHF 1,908.00*
Similar products
For quick and easy measurement of fluoride ions in aqueous solutions. When using the half cell electrodes 9409BN and 9409SC, a separately available reference electrode is needed.
Modular half cell with exchangeable diaphragm and S-7 plug head for determining the concentration of individual ions in aqueous solutions. Easy to use and require comparatively low expenditure on apparatus thereby offering advantages over wet chemistry and instrument analysis methods. Ion selective electrodes must be used in conjunction with a suitable reference electrode (InLab® Reference, cat no. 9.041 590 or InLab® Reference Plus, cat no. 9.041 591).
Gas and ion selective electrode for determination of ammonia content in aqueous solutions. For rapid and precise measurement of ammonia.Scope of supply: Waterproof BNC connector, 1 m cable, 20 loose membranes, preassembled outer body and membrane cap, 2 x 60 ml bottles of electrode filling solution, spout cap, tweezers
For high performance applications. Rapid results within one minute at concentrations from 1 ppm. Very good linear response.Scope of supply: Waterproof BNC connector, 1 m cable, 20 loose membranes, preassembled outer body and membrane cap, 2 x 60 ml bottles of electrode filling solution, spout cap, tweezers
With plastic shaft, exchangeable membrane modul.