Jars, PFA
CHF 103.00*
Content:
1
Delivery according to order confirmation
Product number:
6267468
Manufacturer:
Saint Gobain
Packaging information:
Weight:
0.082 kg
Description
PFA jars store solutions, paste and bulk materials with no concern about leaching, corrosion, contamination or evaporation. They are resistant to corrosive liquids, acids, solvents, sensitive reagents, and staining solutions. PFA jars feature a large mouth for easy access and non-stick surface for easy cleaning. There is an area for identification marking on the side of the jars. Stackable, these jars have a knurled top for secure grip to facilitate easy opening and closing.
- Chemically resistant
- Ultra-pure
- Heat resistant and usable to cryogenic temperatures
- Secondary inner seal design for safety and integrity
- Ideal for storing digestion samples
Properties
| Height: | 47 mm |
|---|---|
| Manufacturer Article Number: | D1069024 |
| Material: | PFA |
| Nominal capacity: | 60 ml |
| Opening int. Ø: | 51 mm |
| Type of closure: | Screw cap |
| UNSPSC: | 41104100 |
Skip product gallery
Wide-mouth bottles with screw thread, PFA
From
CHF 185.00*
Narrow-mouth bottles Nalgene™ Type 1600, FEP with screw cap ETFE
From
CHF 53.00*
Volumetric flasks, PFA, class A, with screw cap
From
CHF 188.60*
Narrow-Mouth Bottle Nalgene™ Teflon™ PFA, with screw cap
From
CHF 60.70*
Gas washing columns, FEP/PTFE
From
CHF 448.00*
Beakers, ETFE
From
CHF 14.40*
Beakers, low form, PTFE
From
CHF 27.30*
Similar products
Transparent, with tightly sealing screw closure (saw-tooth thread S and built-in sealing lip). Excellent resistance to temperature (from -200 to +250 °C). Ideal for long-term storage of high-purity oxidants, acids, alkalis, as well as hydrocarbons, trace analysis solvents and standards. Autoclavable at 121°C (2 bar) according to DIN EN 285.
Transparent. Teflon® FEP bottle with leakproof Teflon® ETFE screw cap. Highly resistant to chemicals, corrosion and temperature. Autoclavable - cap should be unscrewed and sat loosely on neck before autoclaving.Teflon® and Tefzel® are registered trademarks of DuPont.
Highly transparent. Class A tolerances according to DIN EN ISO 1042.The PFA screw cap guards against contamination.Outstanding chemical resistance, can be used with strong oxidants, highly concentrated acids and alkalis, hydrocarbons, and ketones.With laser-engraved lot number and batch certificate. Thermal stress up to 121ºC (autoclaving) does not permanently exceed the tolerance limit.To preserve the ring mark, do not clean at temperatures exceeding 60ºC.The advantages of PFALong-term maintenance of low-concentration reference materials in PFA containersNo memory effectsPractically no carryover, no cross-contamination due to the extremely hydrophobic, anti-adhesive and smooth surfacesHigh thermal stability, from -200°C to +260°CChemical inertness against nearly all chemicalsGood transparency and dimensional stability, suitable for volumetric instrumentsEasy to cleanUse of high purity raw materials
Chemical and corrosion resistantTemperature resistant from -270 to +250 ° CLeak-proof Teflon ™ PFA screw capsAutoclavable
PTFE top with two threaded connections. The standard PTFE frit has a pore size of approx. 3 µm and is screwed on the riser tube with an M8x1 thread. It can be exchanged with the PTFE gas distributor with fine bores which needs a lower primary pressure.Temperature resistance: from -200°C to 250°CTransparentUnbreakableFrit easily exchangeable
Transparent. Good chemical resistance. With graduation, beaded rim and spout.
With reinforced rim and spout. Ungraduated.Excellent chemical and temperature resistance.