MaxQ 6000 Incubated and Refrigerated Stackable Shakers, orbital | Type: MaxQ 6000
CHF 14,352.00*
Content:
1
Delivery according to order confirmation
Product number:
4011067
Manufacturer:
Thermo Elect.LED GmbH (Kendro)
Weight:
101 kg
* Specifications refer to the packaging unit
- Units can be stacked two high on the floor with the stacking kit accessory
- Speed range: 15 to 300 rpm (stacked), 15 to 500 rpm (unstacked)
- Two adjustable-height shelves provide added storage
- Large viewing window and internal light offer sample visibility
- View temperature, speed and time simultaneously on three individual displays
- Door can be hinged from the right or left by the user for convenient placement in lab
- Triple eccentric drive handles heavy loads, provides uniform agitation and continuous 24-hour operation, even at high speeds
- Visual/audible alarms alert you to temperature deviations. Heat turns off if temperature deviates ±1 °C of set point
- Shaker shut down and visual/audible alarms signal if unit operates ±10 % of set speed, preventing shaker from moving
- Unbalanced load sensor stops platform motion when excess vibration is detected visual/audio alarms signal until condition is corrected
- Soft start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure
- Retains parameters during power failure and restarts unit automatically after power is restored
- Over-temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails
- Safety interlock stops shaking motion when the door is open
- 5 year warranty and 10 year on drive mechanism
| Accuracy temperature: | ±0.1 °C |
|---|---|
| Accuracy temperature Number: | 0.1 °C |
| Depth: | 838 mm |
| Depth moving table: | 457 mm |
| Dimensions (WxDxH): | 699 x 838 x 1029 mm |
| Height: | 1029 mm |
| Manufacturer Article Number: | SHKE6000-1CE |
| Max. loading capacity: | 15.9 kg |
| Max. speed: | 500 1/min |
| Max. temperature: | 80 °C |
| Min. speed: | 15 1/min |
| Min. temperature: | +10 °C |
| Moving table (WxD): | 457 x 457 mm |
| Power supply: | 240 V, 50/60 Hz |
| Shaking stroke: | 19 mm |
| Speed: | 15 ... 500 1/min |
| Temperature: | RT+10 ... 80 °C |
| Temperature addition: | RT |
| Type: | MaxQ 6000 |
| Width: | 699 mm |
| Width moving table: | 457 mm |
| With timer: | Yes |
Accessories
Thermo Elect.LED GmbH (Kendro)
Clamps for shaking incubators MaxQ/Solaris™ and orbital shakers Solaris™
Thermo Elect.LED GmbH (Kendro)
Test tube racks for shaking incubators MaxQ/Solaris™ and orbital shakers Solaris™
Test tube racks with adjustable inclination angle.
Thermo Elect.LED GmbH (Kendro)
Adhesive Flask Mat for MaxQ / MaxQ HP Shakers
Our Adhesive Flask Mat is an alternative to flask clamps for securing odd shaped objects such as bottles, volumetric flasks and test tube racks to a shaker platform. Simply place the 21 cm x 21 cm Adhesive Flask Mat on an anodised aluminum or stainless steel shaker platform and secure the vessel to it. It will hold Erlenmeyer flasks as large as 4 l that contain 2 l of media at speeds up to 250 rpm.The mat is not suitable for use in water baths.Easy-to-view samples. The white background makes it easy to determine when to harvest your samplesSimple to clean. Can be restored to like new condition by wiping with alcoholLong lasting. Months of use without losing adhesive properties
Similar products
With approximate graduations. Reinforced, sturdy rim and increased mechanical strength for heavy duty. Glass Type I / neutral glass as per USP, EP and JP. With retrace code (Batch Identification). Certificate available via the Internet. Autoclavable.
AS 4000.1 Universal attachmentFor various types of vessels. Infinitely variable clamping rolls allow universal adaptation to various vessels.Included with delivery: 1 x AS 1.400 Basic holder, 6 x AS 1.401 Clamping roll, 12 x AS 1.402 Fastening screwAS 4000.2 Fixing clip attachmentFor shaking flasks, Erlenmeyer flasks and bottles with a round crosssection (without fixing clips).Number of fixing clips (volume): 50 x AS 2.1(25ml), 48 x AS 2.2 (50ml), 25 x AS 2.3 (100ml), 16 x AS 2.4 (250ml), 12 x AS 2.5 (500ml), 7 x AS 2.6 (1000 ml)AS 4000.3 Dish attachmentFor smooth shaking operations in the low viscosity range, e.g. for cell cultures, nutrient media in Petri dishes, culture bottles and vessels with a low centre of gravity. With integrated slip-resistant foil (PP).*Spare parts for universal attachment.
Thermo Elect.LED GmbH (Kendro)
Adhesive Flask Mat for MaxQ / MaxQ HP Shakers
Our Adhesive Flask Mat is an alternative to flask clamps for securing odd shaped objects such as bottles, volumetric flasks and test tube racks to a shaker platform. Simply place the 21 cm x 21 cm Adhesive Flask Mat on an anodised aluminum or stainless steel shaker platform and secure the vessel to it. It will hold Erlenmeyer flasks as large as 4 l that contain 2 l of media at speeds up to 250 rpm.The mat is not suitable for use in water baths.Easy-to-view samples. The white background makes it easy to determine when to harvest your samplesSimple to clean. Can be restored to like new condition by wiping with alcoholLong lasting. Months of use without losing adhesive properties
These incubators with integrated orbital shaker are ideal for cell culturing procedures, especially suspension culture applications. Compact units for bench-top use.Microprocessor controlledForced air circulation for uniform chamber temperatureDigital display for temperature and speedTimer from 1 second to 9 daysUSB connectionUnique retractable platform for easy loading and unloadingWith alarm function
With approximate graduations. Reinforced sturdy rim, and increased mechanical strength for heavy duty. Glass type I / neutral glass as per USP, EP and JP. With Retrace Code (Batch Identification) certificate available via the Internet. Autoclavable.
Innovative incubator shaker design allowing unattended operation in a temperature-controlled environment.large LED display for speed and time settingscontrols with antimicrobial coating for reduction of bacteriaintegrated PID temperature control (two Pt1000 temperature sensors can be used)socket in the work area for connection of an additional temperature sensor e.g. PT1000.60 (included in delivery)electronic temperature and speed controlelectronic timer switch: 0 to 999h (set by the minute or by the hour)KS 4000 ic with built-in cooler for connection to an external cooling unit e.g. RC 2 basicunit switches off automatically if disturbedunit stops automatically when hood is liftedcollecting tray for spillages with draining tube at rear of unitall functions can be controlled and documented using labworldsoft® softwareattachments not included - Please order accessories as required
The Benchtop Shaking Incubator is a combination of a shaker and a temperature chamber, designed for shaking and heat treatment of sensitive samples. It replaces two devices, reduces time and space needed. It is very suitable for biochemistry, microbiology and medicine laboratories in which thermal and shaking treatment of samples is a daily used routine.High temperature working rangeCan be used in cold rooms tooDigital readout of all parameters - read temporary or preset RPM, temperature, time, accelerationParameter changes while the device is running (except timer)Last parameter values reside in the memory even if the device was switched offPrecisely adjusted and maintained temperature regulation within 0.5 °C of absolute deviation from the set temperatureHOLD and STEP time function with 1 minute resolutionEasy interchangeable platformsLid sensorUniveral attachement and non-slip mat please order separately.