PTFE Vacuum tubing with stainless steel small flanges, KF | Size: DN 16
CHF 402.00*
Content:
1
Delivery according to order confirmation
Product number:
9882617
Manufacturer:
Vacuubrand GmbH & Co.KG
Weight:
0.328 kg
* Specifications refer to the packaging unit
Antistatic PTFE. Flanges in grade 1.4305 stainless steel.
Virtually smooth internal walls to prevent accumulation of condensate or particles, provide high throughput with minimal turbulence.
* Minimum bend radius for...
Other small-flange components, vacuum valves and tubes on request.
Virtually smooth internal walls to prevent accumulation of condensate or particles, provide high throughput with minimal turbulence.
- chemically resistant PTFE
- antistatic according to BS 2050:1978*, <107 Ohm resistance between inside and flanges to prevent formation of electrostatic charges inside and outside, as required for ATEX applications.
* Minimum bend radius for...
Other small-flange components, vacuum valves and tubes on request.
| B* One-off bending: | 150 |
|---|---|
| B* Repeated bending: | 300 |
| Dual Use: | 0 |
| Length mm: | 500 |
| Manufacturer Article Number: | 20686030 |
| Size: | DN 16 |
Similar products
Flanged tubing nozzles, aluminium. For Type KF small flange.
The VACUU LAN® local vacuum network allows multiple work stations to be connected to a single vacuum pump. This is useful for almost any conventional vacuum application in a chemical laboratory VACUU LAN® can be directly incorporated into new laboratory installations or retro-fitted. All assemblies have integral check (1-way) valves. A practical and economical solution for multiple vacuum users in a single laboratory.Detailed brochures are available on request!
Oil for rotary vane pumps B: Standard pump oil. High viscosity, low vapour pressure, good chemical resistance.Oil for rotary vane pumps K 8: For acid vapours. Strongly hygroscopic, with limited capacity for water vapour. Pump must be factory-adjusted to accept this oil.Perfluorpolyether oil: Synthetic Oil. Certified for pumping pure oxygen.
Small flanges. Stainless steel. With male or female conical ground joints and DN flange as outlined below.
Stainless steel/FPM (e.g. Viton®). For Type KF small flange.
Flanged at both ends. For Type KF small flange. B1 = Minimum radius for one-off bending.B2 = Minimum radius for repeated bending.