Sedimentation cones, accessory holders
Product number:
9304292
Manufacturer:
Glaswarenfabrik Karl Hecht
Packaging information:
Weight:
1.414 kg
Description
Imhoff pattern, wood.
Properties
| Depth: | 180 mm |
|---|---|
| Dimensions (WxDxH): | 300 x 180 x 300 mm |
| Height: | 300 mm |
| Manufacturer Article Number: | 44277020 |
| Material: | Wood |
| No. of sedimentation cones: | 2 |
| Width: | 300 mm |
Skip product gallery
From
CHF 83.40*
Other customers also bought
Kartell S.p.A.
Kartell S.p.A.
Sedimentation cones, accessory stand, Acrylic/PP
Acrylic/PP. To hold two Imhoff sedimentation cones. Compact and easy to transport even when fully loaded.
Skip product gallery
Sedimentation cone, plastic, SAN
From
CHF 48.30*
Accessory holders for sedimentation cones, PVC
From
CHF 203.00*
Imhoff Sedimentation cones, borosilicate glass 3.3
From
CHF 104.00*
Secchi Disk
From
CHF 37.45*
Flocculation tester ET 730 / ET 740 / ET 750, bench top
From
CHF 1,850.00*
Turbidity Standards
From
CHF 107.70*
Sedimentation unit set, Nalgene®, PC
From
CHF 196.30*
Similar products
Imhoff pattern. DIN 12672. Transparent SAN (Styrene acrylonitrile). With screw cap for draining the contents. Temperature-resistant up to max. 85°C.
Imhoff pattern, solid grey PVC. Stable design.
Manufactured from borosilicate glass 3.3 according to sedimentation tests according to DIN 12672 standard. Featured with volume graduation of 1000 ml. Volume graduations and inscriptions are printed with white enamel.
For determining the depth of visibility and light permeability of water. Sturdy design made of strong, hard-wearing plastic. Lead weight for better lowering. The approx. 15 cm high rod is fitted with an eyelet for fastening the lowering engine. The lowering line is marked in intervals of 100 cm with figures from 1 to 10 and in between additionally with line markings each 50 cm for better reading of the depth of visibility while the disk is being lowered.Lowering line, please order separately.
Designed for efficiency testing of flocculation or precipitation agents.For use in laboratories. Model ET 730 portableIlluminated back panel for glare-free observation of the samplesModels ET 740 and ET 750 with continuously variable stirring speedSpeed of ET 730 can be adjusted to 20, 40, 50, 100 and 200 min-1Timer feature and digital displayHeight adjustment of the stirring blades during operationFor beakers with 1000 to 1500 ml volume, tall and low formSpecificationsSpeed controlAL30:
AL40 + AL50:20, 40, 50, 100, 120 min-1
10 ... 300 min-1 (stepless)TimerAL30:
AL40 + AL50:0 ... 30 minutes (continuous)
0 ... 999 min or 0 ... 99 h (continuous)Power Supply:100 ... 240 V, 50/60 Hz
Highly accurate turbidity standards composed of suspended microspheres, suitable for Instrument calibration and control of all turbidity meters. Stable, shelf life of 2 years (from Date of Manufacturing). NIST traceable, US EPA approved and tested in compliance with ISO 7027. HDPE bottles of 100 ml.Two ranges available:Ratio range for Ratio Turbidity Measuring instruments (measure of the scattered light from the sample at a 90° angle from the incident light, plus at additional angles (several detectors)Non Ratio for Non Ratio Turbidity Measuring instruments will measure the scattered light from the sample at a 90° angle from the incident light (one detector)
Transparent, shockproof, with easily readable white graduations. Sedimentation and centrifuge tests for sludge quality are used in the analysis of the active sludge deposition process.Scope of delivery: Jar and cover (PC), scoop (PP), 10 x 15 ml conical centrifuge tubes (PC), with caps (PP), manual and data sheet.