Soxhlet extractors, without stopcock | Volume ml: 150
CHF 66.00*
Content:
1
| Quantity | Unit price |
|---|---|
| To 9 |
CHF 66.00*
|
| From 10 |
CHF 59.50*
|
7 Available. Delivery time: 5-7 workdays
Product number:
4008420
Manufacturer:
ISOLAB Laborgeräte GmbH
Length:
396 mm
Width:
88 mm
Height:
60 mm
Weight:
0.259 kg
* Specifications refer to the packaging unit
Borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12602.
| Cone NS: | 29/32 |
|---|---|
| Socket NS: | 45/40 |
| Volume ml: | 150 |
Accessories
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
Otto Fahsig GmbH
Gas leak detection fluid
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
BRAND GMBH + CO.KG
Sleeves, PTFE, disposable
Seals without grease - no grease residues are left in the analysis. Excellent chemical resistance. Can be used in temperatures from -200 to 260°C. Wall thickness only 0.05mm. Wide range of applications, also suitable for vacuums down to 0.1mbar, e.g. for rotary evaporators.
J.P. Pöllathologie
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.Working temperature range:-40 ... 200 °C, to 10-5 mbarVapour pressure:0.00001 mbar
DWK Life Sciences GmbH (Duran)
Engler distilling flasks, DURAN®, ASTM, with beaded rim
Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel
For tapered ground joints as outlined belowWith or without set screw
Dr. Dietmar Glindemann
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
Similar products
Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard
Separating funnel with PTFE stopcock.DIN ISO 4800With standard ground joint and stopper
Borosilicate glass 3.3 which is resistant to heat and almost all chemicals. They meet the highest quality standards according to DIN 12602.
Suitable to hold all types of laboratory funnels and also separatory funnels with diameter from 60 up to 150 mm. Two tapered wedges are provided to ensure firm grip.
Conical pattern. With PTFE stopcock and retaining device. Available with or without, scale to read the approximate volume. With PP conical stopper.
With PTFE plug. Available with or without scale to read the approximate volume. With PP-stopper .
Supplied with PTFE stopcock. With PE conical stopper.ISO 4800NS necks according to DIN 12242 standard
Cylindrical shape with straight discharge tube, with NS socket and PE stopper, with PTFE plug, with screwthread retaining device, with scale (approx. volume / ml).* With rubber-ring retainer
Soxhlet extraction stillheads, made of DURAN® tubing. Extractor heads acc. to DIN 12602 and in addition to DIN standard (*).
Volume graduations and inscriptions are printed with white enamelThick wall and reinforced rimInterchangeable PTFE stopcockAccording to DIN 12242ISO 4800