Spare parts kits for Diaphragm vacuum pumps and pump systems LABOPORT®/LABOBASE®
CHF 591.00*
Content:
1
Delivery according to order confirmation
Product number:
7671499
Manufacturer:
KNF NEUBERGER GmbH
Packaging information:
Weight:
0.386 kg
Description
Properties
| For: | N 860.3 FT.40.18, SBC 860.40 |
|---|---|
| Manufacturer Article Number: | 047499 |
| UNSPSC: | 40151502 |
Skip product gallery
Mini-Diaphragm vacuum pumps LABOPORT® N 96, chemically-resistant
From
CHF 539.00*
Mini Diaphragm Vacuum Pumps LABOPORT® N 816.3 KT.18
From
CHF 1,070.00*
Diaphragm vacuum pumps LABOPORT®, ATEX-compliant
From
CHF 2,062.00*
Diaphragm pumps, Aluminium
From
CHF 1,486.00*
Chemistry Diaphragm Vacuum Pumps with ATEX compliance
From
CHF 7,375.00*
Diaphragm vacuum pumps -NT Series, Chemistry design
From
CHF 2,099.00*
Diaphragm pumps chemistry design, ME 1C
From
CHF 1,296.00*
Similar products
The Pump combines a high flow rate with a very compact design. Suitable for filtration, SPE, and liquid aspiration using a vacuum. Due to the manual rotational speed control, the pump is quiet, very energy efficient, and can be optimally adjusted in accordance with the application.Easy-to-clean surfaceVery small footprintAdjustable in flowrate due to manual rotational speed controlPTFE-coated diaphragm for use with aggressive/corrosive gases and vapors
For filtration, degassing desiccation, liquid extraction and solid phase extraction.PTFE-coated diaphragm is ideal for aggressive/corrosive gases and vaporsPump head made from PPS (Polyphenylsulfide), valves made from FFPM (Perfluoro rubber)
Application: Fluid aspiration, Degassing, Gel drying, Rotary evaporation, Centrifugal concentration, DistillationHigh level of vapor and condensate compatibilityPTFE pump head combined with PTFE-coated diaphragm are ideal for extremely aggressive/corrosive gases and vaporsIn accordance with ATEX II 2/-G IIB+H2 T3 Gb internal atmosphere only
Improved performance, increased pumping speed (up to 16 m³/h) and better ultimate vacuum (up to 0.3 mbar). Extend applications with non-aggressive gases whether used in the laboratory or for industrial processesVery low leak rate due to enhanced leak-tight tubing connections, resulting in consistent performance characteristics - even after many years of operation. Ideal for analytical applicationsLong diaphragm and valve lifetimes: made of highly flexible FPM, with fabric-reinforced double diaphragms for improved long term stabilityVery quiet and ultra low vibration due to compact drive with patented motor drive system. Ideal as a built-in component for sensitive analytical equipmentEasy to clean due to smooth surfaces. A robust solution for numerous applications in industrial environmentsThe VARIO® design provides vacuum control by precise and continuous adaption of the diaphragm pumps motor speed, and includes the vacuum pump, as well as the VACUU·SELECT controller.Country-specific power cord versions available on request.
ATEX chemistry diaphragm pumps offer all advantages of oil-free chemistry diaphragm pumps. Typical applications are rotary evaporators and drying ovens with potentially explosive atmospheres. The ATEX approval includes the interior of the pump (in contact with pumped gases) as well as the surrounding area of the pump.Outstanding chemical resistance and superior vapor toleranceMainly made of antistatic materialsFlame proof motor with integrated, self-locking overload and excess temperature protection for direct 230V / 50Hz single phase power supplyOverpressure safety relief valves internally and at outletWith separate gas ballast connection part for use of inert gasSafety diaphragm technology with option for inert gas purge and detection of diaphragm breakageATEX compliance:Pump chamber (pumped gases): II 2G IIC T3 XExterior space (pump environment): II 2G IIB T4 X (with inert gas purging) / II 3G IIB T4 X (without inert gas purging)Speed-controlled ATEX VARIO vacuum pumps on request.
Improved performance, increased pumping speed and lower ultimate vacuum extends applications in both the laboratory and in industrial applicationsLong-life diaphragm with PTFE sandwich construction and unstressed diaphragm supportEasy service/exchange of diaphragm or valves due to novel integrated valve head assembly. Easy dismantling, cleaning and reassembly without requiring readjustmentVery quiet and ultra low vibration due to compact drive with patented motor control system. Ideal as a built-in component for sensitive equipment in both the laboratory and in industrySuperior vapour tolerance due to integral tubing connections and gas ballast valve for continuous purge (for ME 16C NT, MZ 2C NT, MD 4C / 12C NT and MV 10C NT)Easy to clean due to smooth exterior surfacesThe VARIO® design provides vacuum control by precise and continuous adaption of the chemistry diaphragm pumps motor speed, and includes the vacuum pump, as well as the VACUU·SELECT controller.Diaphragm pump MD 4CRL NT with reduced leakage rate (0.001 mbar x l/s).Country-specific power cord versions available on request.
The diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.The diaphragm pumps ME 1C offer a compact and high performance solution. With their easy-to-use functionality, they are the perfect partner for both single and multiple filtrations.One-stage diaphragm pumps are an excellent solution for continuous, oil-free pumping of gases and vapors for modest vacuum requirements. In contrast to water-jet pumps, they do not consume water and therefore do not produce any contaminated waste water in daily use.Vacuum filtration is frequently used for sample preparation in chemistry, microbiology, waste water control and analysis.In the chemistry diaphragm pumps ("C") all major parts in contact with pumped media are made of chemically resistant fluoroplastics. The ME 1C is also often used for solid phase extraction (SPE).An optional manual regulator valve with dial gauge enables variable fine adjustment of the pumping speed and the ultimate vacuum.Gas ballast for reliable pump performance.Two up to four stage chemistry diaphragm pumps (letters in the product name Z, D or V) are equipped with a manual gas ballast valve as standard. The supply of gas ballast minimizes the risk of condensation inside the pump.Diaphragm pumps ATEX-models available on request. Country-specific power cord versions available on request.