Splash head adapter, borosilicate glass 3.3, straight
CHF 39.50*
Content:
1
26 Available. Delivery time: 5-7 workdays
Product number:
6255503
Manufacturer:
ISOLAB Laborgeräte GmbH
Packaging information:
Length:
287 mm
Width:
73 mm
Height:
75 mm
Weight:
0.092 kg
Description
Suitable to be used in distillation assemblies to prevent raw liquid step over from flask to condenser.
Properties
| Cone[s] straight: | NS29/32 |
|---|---|
| Manufacturer Article Number: | 065.47.003 |
| Material: | Boro 3.3 |
| Socket[s] straight: | NS29/32 |
Skip product gallery
From
CHF 19.00*
From
CHF 4.80*
From
CHF 37.00*
From
CHF 6.30*
From
CHF 2.00*
From
CHF 9.50*
From
CHF 55.20*
From
CHF 3.70*
From
CHF 30.90*
From
CHF 9.30*
From
CHF 36.30*
Accessories
J.P. Pöllath
J.P. Pöllath
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Lenz-Laborglas GmbH & Co. KG
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel, with set screw
For tapered ground joints as outlined belowWith or without set screwFor tapered ground joints as outlined below
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
Bohlender GmbH
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
Bohlender GmbH
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
DWK Life Sciences GmbH (Duran)
DWK Life Sciences GmbH (Duran)
Engler distilling flasks, DURAN®, ASTM, with beaded rim
Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405
H W S Hans W. Schmidt
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
Buddeberg GmbH
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
Otto Fahsig GmbH
Otto Fahsig GmbH
Gas leak detection fluid, bottle
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Dr. Dietmar Glindemann
Dr. Dietmar Glindemann
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage
Skip product gallery
Evaporating flasks with conical ground joint, DURAN®
From
CHF 12.90*
LLG-Fork clamps for spherical joints
From
CHF 9.80*
Evaporator flask pear shape, borosilicate glass 3.3
From
CHF 21.80*
Rubber balloon with hose connection
From
CHF 40.60*
Powder flasks with conical ground joint, DURAN®
From
CHF 112.00*
Receiving flasks, with spherical ground glass joint, borosilicate glass 3.3
Price on request
Receiving flasks, DURAN®
From
CHF 58.80*
Evaporating flasks with conical ground joint, DURAN®, with PUR coating
From
CHF 105.00*
Receiving flasks, DURAN®, with PUR coating
From
CHF 139.00*
Similar products
Especially for rotary evaporators, with center neck and conical joint, pear-shaped, material: DURAN®
Made of stainless steel 304. For spherical ground joint connections. With set screw.
Pear shaped Evaporator flask with NS 29/32, suitable for all Rotary evaporators.
Latex (NR)For rotary evaporatorsSuitable for mixture or collection and short-term storage of gasesFor control of air/gas entry or tread out of gas in instrumentsTubing length 140 mm, inside diameter 7 mm
Specially for rotary evaporators. For the drying of powder-like substances. With center neck and conical joint, with inscription label.
Receiving flasks with spherical ground glass joint KS35 suitable for all Rotary evaporators.
Especially for rotary evaporators, with spherical joint socket S 35, autoclavable, material: DURAN®.
Especially for rotary evaporators, with center neck and conical joint, with highly transparent PUR coating, autoclavable, pear-shaped, material: DURAN®
Especially for rotary evaporators, with spherical joint socket S 35, autoclavable, material: DURAN®.