Stand for safety pouch Poxygrid® | Type: Stand for safety pouch

The bright orange, epoxy-coated steel wire stand provides a stable support to keep the safety pouch upright and open for easy access. This hard to pierce pouch offers protection against the danger of being cut by contaminated sharp objects. After filling, the top flaps close and lock in place for safe disposal.
  • Solid oval paperboard pouch
  • Printed with bold biohazard symbol

Dimensions mm: 100 x 130 x 200
Type: Stand for safety pouch

Similar products

LLG-Autoclavable bags, PP
Constructed from very strong PP film with a broad seam at the bottom. For the disposal of contaminated labware. When autoclaving, the neck of the bag must be left open. Film thickness: 50 µm.
From CHF 10.90*

Holder for Waste Sacks
Warning: Never place sharp objects such as hypodermic needles, etc., in plastic bags! Always steam-sterilize bags unsealed.Injury hazard!WhiteSteel wireEpoxy resin coatingWith rubber feets
From CHF 8.60*

Waste sacks, PP
For collecting and discarding used disposables. Caution: Never put sharp objects such as needles into plastic bags. Risk of injury! Bags must be open during sterilisation. Please order stand separately.Autoclavable (to 121°C)
From CHF 21.80*

Waste sacks, PA
For collecting and discarding used disposables. Caution: Never put sharp objects such as needles into plastic bags. Risk of injury! Bags must be open during sterilisation. Please order stand separately.Autoclavable (134°C)Hot air sterilisation (at 180°C)
From CHF 32.10*

Autoclavable waste bags, standard, PP
Made of very strong PP-film with a broad seam at the bottom, for the disposal of contaminated labware. Autoclavable.Please order stand separately.
From CHF 11.30*

Cable Ties
Nylon, flat, single use - cannot be reopened
From CHF 5.10*
Tip

LLG-Autoclavable Bags, PP, with Biohazard printing
Autoclavable bags imprinted with biohazard labelling. Made of polypropylene. Strong side seams for securely holding items. Front write-on panel. Autoclavable.
From CHF 14.80*

Autoclavable waste bags, biohazard, PP
Made of very strong PP-film with a broad seam at the bottom, for the disposal of contaminated labware. Autoclavable at 134 °C. Imprinted with warning labels and sterilisation indicator.Please order stand separately.
From CHF 306.00*

Bench-top stand for waste disposal bags
Plastic coated iron. With non-slip rubber feet.
From CHF 19.30*

Disposal bags, Biohazard, super strength, PP, 50 µm
Red-orange. With pre-printed sterilization indicator patch, which darkens when bag is autoclaved.Maximum protection against dangerous tears and leaksMaterial: blended polymerASTM 1709 and ASTM 1922Autoclavable at 135 °CPrint: standard biohazard warning symbolPrecautionary procedures in four languages: English, French, German and Spanish
From CHF 374.90*