Thermostatic controllers Optima™ TX150 / TXF200 | Type: TX150
CHF 2,100.60*
Content:
1
Delivery according to order confirmation
Product number:
9699632
Manufacturer:
Grant Instruments Ltd.
Length:
442 mm
Width:
308 mm
Height:
200 mm
Weight:
3.6 kg
* Specifications refer to the packaging unit
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use.
The two advanced heating circulators feature a modern, icon driven programming interface and full colour display.
For using at or below room temperature you need additional flow coolers C1G (9.920 765) or C2G (9.920 766).
Features:
Visual and audible alarm, timer, 5 point recalibration, adjustable over temperature cut-out, pump, external probe, progammable, relay, menu system, program storage, USB/RS-232 port
Models with clamps available on request.
The two advanced heating circulators feature a modern, icon driven programming interface and full colour display.
For using at or below room temperature you need additional flow coolers C1G (9.920 765) or C2G (9.920 766).
Features:
Visual and audible alarm, timer, 5 point recalibration, adjustable over temperature cut-out, pump, external probe, progammable, relay, menu system, program storage, USB/RS-232 port
Models with clamps available on request.
| Specifications Temperature range with stainless steel tank | |
| TX150: TXF200: | RT + 5 °C ... 150 °C RT + 5 °C ... 200 °C |
| Stability / Uniformity (DIN 12876) at 70 °C: | ±0.01 °C / ±0.05 °C |
| Setting resolution: | 0.1 °C (0.01 °C with Labwise) |
| Display: | QVGA TFT |
| Timer: | 1 min to 99 hrs 59 mins |
| No. of pre-set temperatures: | 3 |
| Recalibration points: | 5 |
| Heating power (230 V): Power supply (230 V / 50-60 Hz): | 1.9 kW 2.0 kW |
| Interface: | USB and RS232 |
| Pump max. pressure | |
| TX150: | 310 mbar |
| TXF200: | 530 mbar |
| Flow rate max. | |
| TX150: TXF200: | 18 l/min 22 l/min (adjustable) |
| Dual Use: | 0 |
|---|---|
| Manufacturer Article Number: | TX150 |
| Programmable: | Remote via PC / labtop, 1 program / 30 segments |
| Type: | TX150 |
Accessories
Grant Instruments Ltd.
Clamp for Thermostatic controllers Optima™ T100 / TC120 / TX150 / TXF200
For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.
Grant Instruments Ltd.
Tanks Optima™ series, stainless steel
High efficiency stainless steel (ST) tanks (range -15 °C to 200 °C). Drain tap included on ST12, ST18, ST26, ST38. Raised feet for carrying repositioning and retort access. Accessory polypropylene spheres or a lid must be used at temperatures between 60 °C and 100 °C. Above 100 °C only a lid must be used. Accessory cooling is required for temperatures below ambient.Please order lid and PP spheres separately.
Grant Instruments Ltd.
Labwise software for Thermostatic controllers Optima™ series
Permits the remote set-up and programming of thermostats with interface from a PC. Real-time temperature / time profile and graphic representation of processes. Profile documentation and programme memory on disk. Minimum requirements: Microsoft Windows XP, Vista (32/64 bit), or Windows 7 (32/64 bit). Pentium III / Celeron 866 MHz or equivalent.
Other customers also bought
Grant Instruments Ltd.
Thermostatic controllers Optima™ T100 / TC120
Combine with a plastic or stainless steel tank or with an accessory T-clamp for independent use.The two general purpose heating circulators offer excellent temperature stability and uniformity with a cooling/heating range of 0 °C to 100 °C* (T100) and -15 °C to 120 °C* (TC120).*For using at or below room temperature you need additional flow coolers C1G (9.920 765) or C2G (9.920 766).Features:T100: Visual alarm, 2 point recalibration, fixed over temperature cut-outTC120: Visual and audible alarm, timer, 2 point recalibration, adjustable over temperature cut-out, pump for external circulationT Clamp: For attaching the thermostats to any vertical sided tank with a maximum wall thickness of 35 mm for rectangular tanks, 30 mm for circular tanks (300 mm diameter), and a capacity of up to 50 l.Models with clamps available on request.Specifications
Temperature range with stainless steel tankT100:
TC120:0°C to +100°C*
-15°C to +120°C*Stability / Uniformity (DIN 12876) at 70°C:±0.05°C / ±0.1°CSetting resolution:0.1°CDisplay:4 digit LEDNo. of pre-set temperatures:3Recalibration points:2Heating power (230V):1.3 kWPower supply (230V / 50-60Hz):1.4 kWTC120 only:Timer:1 to 6000 minsPump max. pressure:210 mbarFlow rate max.:16 l/min
Similar products
LAB-Rings to stabilise glassware and plasticware on shakers or to immerse in water baths. Vinyl-coated lead rings will not mark or scratch benchtops and labware.
Good things come in small packages! Thanks to their low bath volumes the models CC-104A und KISS-104A (with polycarbonate bath) as well as the CC-202C and KISS-202C (with stainless steel bath) are especially suitable for controlling the temperature of small external applications. All models are fitted with rear mounted M16 x 1 pump connections as standard. Models with the Pilot ONE have a speed regulated pressure/suction pump. The temperature constancy, in accordance with DIN12876, is 0.02 K with the Compatible Control models and 0.05 K for the KISS models. Models CC-202C and KISS-202C are fitted with an integrated cooling coil as standard. With the models CC-104A and KISS-104A the cooling coil is an optional extra.Temperature range
CC-104A/KISS-104A:
CC-202C/KISS-202C:
(15) 25 to 100 °C
(-30) 45 to 200 °CTemp. Stability to DIN 12876
CCmodels:
KISS models:
0.02 K
0.05 KSafety class:FL, IIIBath depth:150 mmHeating capacity:2 kW
LAB-Rings to stabilise glassware and plasticware on shakers or to immerse in water baths. Vinyl-coated lead rings will not mark or scratch benchtops and labware.
Test tube racks made of stainless steel.Suitable for heating circulators with the bath types BC4, BC6, B5, BT5 and refrigerated circulators with the bath types 200F, 201F, 300F, 310F, 450F.
For internal and external applications. With powerful components and a large, easy-to-read colored TFT display. Operation is simple and intuitive via the central controller on the front of the device. Equipped with USB interface and with additional analogue (extra code A) or RS232 (extra code D) interface.Easy switching between internal and external circulationIntegrated cooling coil for counter-coolingBuilt-in drain tapIntegrated programmer for 8 x 60 program stepsClass III (FL) acc. to DIN 12876-1Continuously adjustable, powerful pressure pumpPump connections M16 x 1 (outer thread)External Pt100 sensor connection2 hose connectors for 8 and 12 mm I.W. and bath lid included.SpecificationsOperating temperature range:20 ... 200 °CTemperature stability:0.01 °CHeating capacity:2 kWFlow rate:8 ... 27 l/minPump capacity:0.1 ... 0.7 barPower supply:200 ... 230 V, 50/60 Hz
Universal use with precise temperature control for simple applications in a setting range from 0 to 100 °C.3 programmable temperature presetsLow liquid protection and fixed over temperature cut-outVisual alarm in case of malfunctionsClear, bright, 4 digit LED displayThermostat can be used in combination with any other Grant stainless steel tank or with a T-CLAMP with any vertical sided tankScope of supply: Thermostat, bridge plate, stainless steel tankFor cooling below ambient temperature, please order cooler separately.
Test tube racks made of plastic.Suitable for heating thermostats CORIO™ C and CD with the bath types B13, B17, B19, BT19, B27, BT27, B33.
The transparent polycarbonate baths are suitable for use up to 100°C. An immersion thermostat is mounted on the bath bridge for all models. With a pump adapter, this combination can also be used with external, closed applications. Models with the Pilot ONE controller have a variable speed pressure/suction pump and are therefore also suitable for external open applications.Temperature max.:100 °CTemp. Stability at 70 °C to DIN12876KISS E:
CC-E:0.05K
0.02KSafety class:FL, IIIBath depth:150mm