Ultra centrifugal mill ZM 300 | Type: ZM 300
CHF 12,470.00*
Content:
1
Delivery according to order confirmation
Product number:
4685119
Manufacturer:
Retsch GmbH
Weight:
37 kg
* Specifications refer to the packaging unit
The ultra centrifugal mill is used for high-speed size reduction of soft to medium-hard, as well as temperature-sensitive or fibrous materials. Thanks to the Push-Fit system and the patented cassette principle, the accessory components can be changed without tools.
Scope of supply:
Ultra-centrifugal mill ZM 300, 900 ml cassette
Please order rotors and sieves separately.
- Touch display with rotary knob
- Integrated temperature sensor
- Very short grinding time
- Prevention of overloads by feeding the sample too quickly
- Two-stage pre- and fine grinding in one working run
Scope of supply:
Ultra-centrifugal mill ZM 300, 900 ml cassette
Please order rotors and sieves separately.
| Feed size: | 10 mm |
| Final fineness: | 40 µm |
| Speed range: | 6000 ... 23000 rpm |
| Rotor diameter: | 99 mm |
| Dimensions (W x D x H): | 452 x 426 x 431 mm |
| Weight: | 38 kg |
| Power supply: | 230 V, 50/60 Hz |
| IP code: | IP 20 |
| Supply requirements: | 200 ... 240 V, 50/60 Hz |
|---|---|
| Type: | ZM 300 |
Accessories
Retsch GmbH
Accessories for Ultra Centrifugal Mill ZM 300
Further Ring sieves and rotors available on request.
Retsch GmbH
Rotors for Ultra Centrifugal Mill
Further Ring sieves and rotors available on request.
Retsch GmbH
Cyclones for ultra centrifugal mill ZM 300
Cyclones incl. cassette bottom, with outlet and holder.
Retsch GmbH
Ring sieves, stainless steel, coated
For Ultra Centrifugal Mill ZM 300. With reinforced rim, wear-resistant coated.
Retsch GmbH
Ring sieves, stainless steel
For Ultra Centrifugal Mill ZM 300. With reinforced rim.
Retsch GmbH
Ring sieves, Titanium
For Ultra Centrifugal Mill ZM 300. With reinforced rim.
Similar products
Grinding balls are available in different materials.Grinding balls are also offered in the diameters 0.1 mm to 3 mm (to achieve a fineness down to the nanometer-range).
Further Ring sieves and rotors available on request.
With screw cap.Simple and safe handlingDust and air-tightSuitable for wet and cryogenic grinding
The HM100 knife mill is used for grinding soft, medium-hard, brittle and fibrous materials. Especially suitable for samples with a high water, oil or fat content. The 2 knives are driven by a 900 W motor to achieve a reliable grinding result. Suitable for applications in agriculture, biology, medicine and food technology.For soft, elastic, fibrous, aqueous, oily or fatty samplesElectronically controlled speedSamples are grinded in only 10 to 30 secondsUp to 700 ml sample volumeAutoclavable grinding vesselsGrinding vessels available in various materialsCutting knives with 2 stainless steel and titanium blades availableEasy operationQuick startCoarse and fine grinding in one stepInterval, reverse and manual mode availableScope of supply: Knife mill, 1 l grinding vessel made of plastic (autoclavable), lid, stainless steel knifeSpecificationsFeed size:
Feed quantity:40 mm
50 ... 700 mlUlt. fineness:300 µmTimer:1 s ... 10 minMotor speed:2000 ... 10000 rpmPower consumption:900 WDimensions (W x D x H):260 x 343 x 454 mmWeight:16 kgPower supply:220 V, 50 Hz
Suitable for disposable and reusable grinding chambers. By using the disposable grinding chambers the possibility of cross-contamination and the effort of cleaning is eliminated. The mills can be used for hard (Mohs hardness up to 5), dry and brittle materials. They are especially suitable for grinding seeds, such as corn and wheat. Increased safety, the operation of the mill is only possible with properly closed grinding chamber and closed lid.Clearly arranged, multilingual OLED-displayUSB interface for control and documentation of all the parametersInterval operation availableStepless adjustable speedAdjustable safety speed and timeProgrammable and storable test conditionsReproducible test resultsTimerEasy operation with touch keypadDust proof sealed housingQuiet operationScope of supply:Tube Mill control: incl. 1 x grinding chamber MT 40 and MMT 40.1 eachTube Mill 100 control: incl. 1 x grinding chamber MT 40, MT 100 and MMT 40.1 eachSpecificationsTube Mill control // Tube Mill 100 controlOperating principle:cutting/impactMotor rating input/output:100 / 80 WSpeed:5000 to 25000 rpmChamber volume:40 ml // 100 mlTimer:
Interval timer:5 s to 3 min
5 s to 60 sOverload protection:yesCircumferential speed:65 m/sMax. feed hardness:5 MohsDimensions (W x D x H):180 x 300 x 170 mm // 180 x 300 x 212 mmWeight:2.7 kg // 2.8 kgIP code:IP 30Power supply:220-240 V, 50/60 Hz
