Viscometers ROTAVISC lo-vi HELI Complete
CHF 4,381.00*
Content:
1
Delivery according to order confirmation
Product number:
4697053
Manufacturer:
IKA-Werke GmbH & Co.KG
Packaging information:
Description
For simple or demanding viscosity measurement of low-viscosity liquids in all areas of application, ranging from the laboratory to quality control. The motorized HELISTAND moves the mounted viscometer and its rotating body slowly and uniformly up and down in the sample.
Scope of supply: Viscometers, stand HELISTAND, spindles SP set-1 and T-SP-SET, temperature sensor PT 100.8, protective bracket
- Highest measurement accuracy
- Stepless speed adjustment
- 4.3" TFT display
- Digital level
- Simple ramp function
- With connection for ext. PT100 sensor
Properties
| Depth: | 372 mm |
|---|---|
| Dimensions (WxDxH): | 351 x 372 x 629 mm |
| Height: | 629 mm |
| IP code: | IP 40 |
| Interfaces: | RS 232, USB |
| Manufacturer Article Number: | 0010013698 |
| Max. Viscosity: | 6000000 mPa·s |
| Max. speed: | 200 1/min |
| Max. torque: | 0.0673 mNm |
| Max. voltage: | 240 V |
| Min. speed: | 0.01 1/min |
| Min. viscosity: | 15 mPa·s |
| Min. voltage: | 100 V |
| Plug type: | EU |
| Power supply: | 100 ... 240 V, 50/60 Hz |
| Power supply frequency: | 50/60 Hz |
| Reproducibility: | 0,2 % |
| Speed: | 0.01 ... 200 1/min |
| Torque: | 0.0673 mNm |
| Type: | ROTAVISC lo-vi HELI Complete |
| Type of auxiliary energy: | Mains connection |
| Viscosity: | 15 ... 6,000,000 mPa·s |
| Weight: | 7.1 kg |
| Width: | 351 mm |
Skip product gallery
From
CHF 4,145.00*
From
CHF 308.00*
From
CHF 4,798.00*
Accessories
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
High-temperate system ROTATEMP
For use with IKA ROTAVISC viscometers. It enables precise temperature control when measuring difficult-to-measure, highly viscous media such as asphalt, bitumen, wax, polymers, candy mass or hot-melt adhesives.Fast and reliable heating to 300 °C in just 16 minutes (when using a silicone oil)Heating oven and control unit are combined in one device with a small footprintCompatible with the optional labworldsoft® 6 Visc viscometer software
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Adapter and spindle sets for Viscometers ROTAVISC
DIN S-1: DIN adapter set.O DIN S-1: The open DIN spindle set measures viscosities according to DIN 53019 and can be used with customer-specific vessels. The set includes a single-wall-open-jacket to quickly dive into the sample liquid as well as a coaxial cylinder system for the analysis of the sample at a specific shear rate and shear stress is included.ELVAS-1: The extremely low viscosity adapter spindle set ELVAS-1 includes a double jacket to quickly heat up or cool down the sample as well as a coaxial cylinder system for the analysis of the sample at a specific shear rate and shear stress. This 16 ml spindle is commonly used with the ROTAVISC lo-vi and allows measurements from 1 mPas (water temperature at 20 °C). The spindle without the water jacket can also be used in customer-specific vessels.VAN-1: The vane spindle set allows the viscosity measurement of suspensions. Four vane spindles are included in the delivery.T-SP-Set: Set with 6 T spindlesSAS-1: Spiral adapter to measure the viscosity of very sticky and other viscous samples. Additionally, it is possible to analyse the fluid behavior of different shear rates.SP set-1: Standard spindle set, inculdes 4 spindles (SP1, SP2, SP3, SP4).SP set-2: Standard spindle set, inculdes 6 spindles (SP7, SP8, SP9, SP10, SP 11, SP12)
IKA-Werke GmbH & Co.KG
IKA-Werke GmbH & Co.KG
Cooling/heating bath circulator CBC visc lite
Designed for combination with the IKA ROTAVISC viscometers and covers a wide temperature range.A second beaker (600 ml) can be pre-tempered during the measurementOptimised water flow management in the insulated bath for fast and precise temperature control.Equipped with environmentally friendly natural refrigerant R290External pump connection for heating standard vessels according to DIN for absolute viscosity definition with ELVAS spindles or double-walled beakersEasy to maintain thanks to easily removable and therefore easy-to-clean air filters
Skip product gallery
Immersion flow cup with fixed nozzle
From
CHF 136.00*
Dipping flow cups Frikmar
From
CHF 98.80*
Flow cups with fixed nozzle
From
CHF 258.00*
Viscometers Ubbelohde, glass, kinematic
From
CHF 619.00*
Rotary viscometer RM 100 portable
From
CHF 9,826.00*
Similar products
With fixed nozzle from stainless steel or aluminium.
Aluminium. DIN 53211 viscometer. With brass nozzle or stainless steel (V2A) as indicated. For all types of liquid chemicals, varnishes, fluid enamels, gravure printing inks and leather dyes, oils, fats, foodstuffs etc. Cup volume 100ml.
With fixed nozzle made of stainless steel. Housing made of titanium anodised aluminum.
ISO 3105, DIN 51562.For manual (type 501 ..) or automatic (type 532 ..) measurements.Constants documented in manufacturer's certificate.
The portable rotary viscometer is ideal for viscosity measurements of paints, coatings, building materials, chemical and petroleum products and for viscosity measurements in the food, car and cosmetics industries.7" touch screenAutonomy of 1 hourUseable with standard standIntegrated temperature probePrinter connectionCompatible with the RheoTex softwareScope of supply: Viscometer, carry caseSpecificationsSpeed range:0.3 ... 1500 min-1 (infinitely variable)Torque range:0.05 ... 30 mNmTemperature range:-50 ... 300 °CAccuracy:± 1 %Repeatability:± 0.2 %Interface:RS232, USBDimensions measuring head (Ø x L):85 x 310 mmUnit dimensions (W x D x H):125 x 265 x 65 mmWeight:2 kgPower supply:90 ... 240 VAC, 50/60 Hz
