: NS29/32
CHF 11.50*
Content:
1
73 Available. Delivery time: 5-7 workdays
Product number:
6244589
Manufacturer:
ISOLAB Laborgeräte GmbH
Length:
137 mm
Width:
41 mm
Height:
40 mm
Weight:
0.025 kg
* Specifications refer to the packaging unit
Manufactured from borosilicate glass 3.3 according to DIN 12257 standard, ideal to use for thermometers with Ø 6 - 8 mm. Screw joint provides easy depth adjustment of thermometer. Seal material: NBR.
| Bore: | 8 mm |
|---|---|
| Material: | Boro 3.3 |
| Standard: | DIN 12257 |
| Thread: | GL 14 |
Accessories
Lenz-Laborglas GmbH & Co. KG
Joint clips for conical joint sleeve connections, stainless steel
For tapered ground joints as outlined belowWith or without set screw
Otto Fahsig GmbH
Gas leak detection fluid
DIN 30657 gas, trace and leak detection fluid. Non-allergenic, non-toxic and odourless. Suitable for all pressure ranges. Non-flammable and therefore suitable for all technical gases such as ammonia, argon and other noble gases, freon, carbon dioxide, coal gas, compressed air, propane, oxygen, nitrogen, water etc. Propellant-free. Unpressurised canister. Flash-point greater than 50°C. Unlimited shelf life. Tested and approved under DIN-DVGW-No. NG to 5170 AN 0456.Spray head not included. Please order separately.
Bohlender GmbH
Sleeves, cone joint, PTFE
With knurled gripping ring at the top of the cone for easy removal. For gas, liquid and vacuum-tight cone joint connections with sizes as outlined below. Reusable. With reinforced external ribs for a high-vacuum tight seal (leakage rate: < 1x10-4mbar x I x s-1). No joint sealant or grease required.
Bohlender GmbH
Sleeves with ribs, PTFE
For use with ground glass joints. Suitable for vacuums up to 0.1mbar. Reusable and long lasting. The sealing ribs grip on the inside wall of the glass socket, sealing without the need for grease and enabling the cone to be freed easily when required.
DWK Life Sciences GmbH (Duran)
Engler distilling flasks, DURAN®, ASTM, with beaded rim
Uniform wall thickness distribution makes these flasks ideal for heating applications and distillations. The flasks are manufactured from a hydrolytically resistant borosilicate glass 3.3, which is defined as "Type I, Class A" in the ASTM Specification E 438.ASTM D86DIN EN ISO 3405
Buddeberg GmbH
BUDDE - joint grease
For all glass joints. Transparent, vacuum tight, water washable and water soluble. Maintains practically the consistency between -30°C and 200°C, non-solidifying. Compatible with most elastomers. Tube of 80g.
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for conical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
H W S Hans W. Schmidt
Ground joint clips for sleeve connections, wire, Chrome-nickel steel
Chrome-nickel steel.
DWK Life Sciences GmbH (Duran)
Joint clips KECK, POM, for spherical ground joints
Melting point 175 °C. Excellent chemical resistance. Rigid. Heat resistant up to 150 °C, sizes colour coded.
J.P. Pöllathologie
Joint grease, K.W.S
Without silicone. Designed as vacuum and high vacuum grease. No silicone derivatives, polymerisation or gumming. Excellent adhesion and viscosity. Acid/alkaline resistant. Locked joints can be loosened by brief, gentle heating. Can be used to make temporary glassware repairs. Biodegradable. Non-toxic in normal use.Working temperature range:-40 ... 200 °C, to 10-5 mbarVapour pressure:0.00001 mbar
BRAND GMBH + CO.KG
Sleeves, PTFE, disposable
Seals without grease - no grease residues are left in the analysis. Excellent chemical resistance. Can be used in temperatures from -200 to 260°C. Wall thickness only 0.05mm. Wide range of applications, also suitable for vacuums down to 0.1mbar, e.g. for rotary evaporators.
Dr. Dietmar Glindemann
PTFE sealing rings for jointed glassware
An effective alternative to common PTFE joint sleeves and PTFE stoppers.Air leakage
Other customers also bought
Lenz-Laborglas GmbH & Co. KG
Screwthread tubes for glassblowers, DURAN®
Acc. to DIN 12216 and in addition to standard (*), with DIN thread (GL), material: DURAN®.
Similar products
5-step irreversible temperature measuring strips covering the temperature range 29 to 290°C. Each strip measures 35 x 15mm.
Red spirit filled glass thermometers with nickel-plated, double plug collar which locks the thermometer into its case or allows the case to connect to the top of the thermometer as an extenson handle. Approx. dimensions when fitted into case: 145 x 11.5 mm diameter, with pocket clip. With uncoated prismatic measuring capillary.
Solid stem, with loop, capillary yellow enameled, graduation resistant against acids and alkalis. Red filling or environmentally friendly blue filling.
Enclosed-scale type, with eyelet. With uncoated, prismatic measuring capillary. Red spirit filling (except 9.235 265: blue).* Note: With these types the colour can fade after extended periods of use at higher temperatures.
With ring at the top, durable pigment, in transparent square plastic case. Scale background in white.
Manufactured from borosilicate glass 3.3 according to DIN 12257 standard, ideal to use for thermometers with Ø 6 - 8 mm. Screw joint provides easy depth adjustment of thermometer. Seal material: NBR.
Graduation resistant against acids and alkalies.
Glass, solid stem, with loop, white backed. Environmentally friendly thermometer, with biodegradable, green spirit filling.
With NS 14.5/23 cone. Enclosed-scale type, Translucent glass scale. Upper section approx. 11 mm diameter, lower section 7.5 mm diameter. Richter-top finish seal without button. Suitable for official calibration.
Digital thermometer with outdoor sensor.Two-tier LCD displayMeasuring temperature range -50 °C to 70 °C, can be switched to °FDisplay resolution 0.1 °CAccuracy ±1 °CDimensions 110 x 70 x 20 mmDisplay size 40 x 30 mmAAA 1.5 V battery includedLength of the cable 190 cm