Hydrogen generators Precision Hydrogen | Type: Precision Hydrogen 450
CHF 16,600.00*
Content:
1
Delivery according to order confirmation
Product number:
4669276
Manufacturer:
Peak Scientific
* Specifications refer to the packaging unit
For the safe and continuous production of hydrogen with a purity of 99.9995% for GC and GC/MS.
Scope of supply: Hydrogen generator, 1 m Tygon® tubing, Deioniser column refill, barbed hose fitting, mains power cable for EU, UK and US, 2 x transit plugs
- On-demand generation of high-purity hydrogen as detector gas for the FID
- Compact, modular and stackable system
- Hydrogen production from deionised water using proton exchange membrane
- Internal leakage detection with automatic switch-off function
- Minimal hydrogen storage in the system
- Front LED touch screen with status display
- Can be individually combined with PEAK zero nitrogen and zero air systems
- Systems are available with different flow rates
- Very low maintenance requirements
- 3 years warranty on the hydrogen cell
Scope of supply: Hydrogen generator, 1 m Tygon® tubing, Deioniser column refill, barbed hose fitting, mains power cable for EU, UK and US, 2 x transit plugs
| Specifications | |
| Purity: | 99.9995 % |
| Max. pressure: | 6.9 bar/100 psi |
| Required water quality: | |
| Gas connection: | 1/8" Swagelok |
| Permissible ambient temperature: | 10 ... 35 °C |
| Dimensions (W x D x H): | 380 x 540 x 406 mm |
| Power supply: | 110/230 V, 50/60 Hz |
| Warranty: | 3 years (cell) / 1 year (device) |
| Dual Use: | 0 |
|---|---|
| Flow rate L / min.: | 0.45 |
| Manufacturer Article Number: | 63-0450 |
| Type: | Precision Hydrogen 450 |
| Weight kg: | 29 |
Similar products
Adapters for detectors and other accessories.
Gas filters are an essential part of GC analysis as contaminants in gases can significantly impact the quality of results. Oxygen, hydrocarbons and moisture can lead to problems such as noisy baselines, moisture entering the GC column and excessive bleed. The gas filter kit consists of a gas filter and a connection unit.Fast stabilization timesThe gas filter system consists of two key parts: the filters and the connecting unitThe connecting unit has inlet and outlet connectors for the gas linesThe connecting unit can be bench or wall-mountedCan be used in combination with other filtersIndicator color change tells you when to change your filter
Very robust, portable device for measuring the flow rate of gas chromatographs and for calibrating air sampling canisters. Measurement is performed in real time, allowing simultaneous flow and pressure measurement to improve validation efficiency. Reduces downtime.For real-time measurement of more than 30 common gases over a wide rangeCheck the volume flow, mass flow, pressure and temperature at the inlet and detector outlet of the GCFlow calibration with NIST-traceable accuracyImmediately ready for use after switching on, measurement completed within 20 secondsFast response time of 10 msTFT displayRS232 interface for data transfer18 hours battery lifeScope of supply: GC flow meter, hard-shell carrying case, spare tubings, tubing connector fittings, power supply with adapters for EU, UK, CH and USSpecificationsRange:0.1 ... 1000 ml/minAccuracy:±0.8 % of reading, 0.2 % of full scaleResolution:
Turn-down Ratio:0.1 ml/min
200:1Operating temperature:-10 ... 60 °CInlet pressure:max. 1000 kPa (145 psi)Dimensions:60 x 170 x 24 mmWeight:450 g
Convenient digital flow meter for the simple, accurate and repeatable measurement of flow in gas chromatographs. User friendly, handy design. Can be used with the carrier gases Air, Hydrogen, Nitrogen, Helium, Carbon dioxide, Argon and Argon/Methane. OLED display shows flow rate and further information. With pressure and temperature compensation. Suitable for columns with diameters of 100, 180, 200, 250, 320, 450, 530 and 750 µm.Measurement of flow rate, linear velocity and split ratioHigh resolution25 point calibration, traceable to National StandardsRechargeable batteryAuto power offScope of supply: Flow meter with case, tubings, tubing adapter fittings, tubing clips, tie-wraps, universal charger with USB connector, operation manual, calibration certificate.Please order adapters for direct connection to the detector separately.SpecificationsRange:0…500 ml/min. (0…300 ml CO2)Accuracy:0.4 ml/min. / ±2.5 %Resolution:0.1 ml/min.Operating temperature:15…35 °C, calibrated at 21±2 °CInlet pressure:max. 175 kPaDimensions:68 x 30 x 130 mmWeight:150 g
For the safe and continuous production of hydrogen with a purity of 99.99999% for trace analysis using GC, GC/MS and ICP.On-demand production of high purity hydrogen as carrier gas and detector gas for the FIDCompact, modular and stackable systemHydrogen production from deionized water using proton exchange membrane, pressure swing adsorption and carbon molecular sieveSystems are available with different flow rates, which can be combinedHighest purity due to regenerative PSA dryerAutomatic charging pump as standardInternal leakage detection with automatic switch-off functionMinimal hydrogen storage in the systemFront LED touch screen with status displayVery low maintenance requirements3 years warranty on the hydrogen cellScope of supply: Hydrogen generator, 1 m Tygon® tubing, Deioniser column refill, barbed hose fitting, mains power cable for EU, UK and US, 2 x transit plugsSpecificationsPurity:99.9999 %Max. pressure:6.9 bar / 100 psiRequired water quality:1.0 µS/cmGas connection:1/8" SwagelokPermissible ambient temperature:10 ... 35 °CDimensions (W x D x H):38.0 x 54.0 x 40.6 cmPower supply:110/230 V, 50/60 HzWarranty:3 years (cell). 1 year (device)
Gas filters are an essential part of your GC analysis as contaminants in gases can significantly impact the quality of results. Oxygen, hydrocarbons and moisture can lead to problems such as noisy baselines, moisture entering the GC column and excessive bleed.Heavy-walled aluminium tubeHigh capacity filtersSintered stainless steel frits prevent particulate contaminationSpecificationsVolume:750 cm3Pessure rating:up to 17.2 bar