Nitrogen generators Precision Nitrogen | Type: Precision Nitrogen 1000
CHF 17,639.05*
Content:
1
Delivery according to order confirmation
Product number:
4669269
Manufacturer:
Peak Scientific
* Specifications refer to the packaging unit
Nitrogen generators for the GC. For safe and continuous production of nitrogen with a purity of 99.9995%.
Scope of supply: Nitrogen generator, 1 m PTFE tubing, 1/4" compression fitting, 1/8" compression fitting, mains power cable for EU, UK and US
- On-demand generation of nitrogen as purge gas and for sample preparation in standard analyses
- Compact, modular and stackable system
- Constant and uniform supply for reliable and reproducible analyses
- Can be individually combined with PEAK hydrogen and zero air generators
- No contamination of the system
- Very fast start time and rapid achievement of the required operating purity
- Available with different flow rates
- Generator for headspace requirements available, compatible with most headspace samplers
- Very low maintenance requirements
Scope of supply: Nitrogen generator, 1 m PTFE tubing, 1/4" compression fitting, 1/8" compression fitting, mains power cable for EU, UK and US
| Specifications | |
| Purity: | 99.9995 % |
| Gas connection: | 1/4" |
| Permissible ambient temperature: | 5 ... 35 °C |
| Dimensions (W x D x H): | 380 x 540 x 256 mm |
| Power supply: | 110/230 V, 50/60 Hz |
| Warranty: | 1 year |
| Flow rate L / min.: | 1.00 |
|---|---|
| Pressure max. bar: | 5.5 (80 psi) |
| Type: | Precision Nitrogen 1000 |
| Weight kg: | 26 |
Similar products
Gas filters are an essential part of GC analysis as contaminants in gases can significantly impact the quality of results. Oxygen, hydrocarbons and moisture can lead to problems such as noisy baselines, moisture entering the GC column and excessive bleed. The gas filter kit consists of a gas filter and a connection unit.Fast stabilization timesThe gas filter system consists of two key parts: the filters and the connecting unitThe connecting unit has inlet and outlet connectors for the gas linesThe connecting unit can be bench or wall-mountedCan be used in combination with other filtersIndicator color change tells you when to change your filter
Adapters for detectors and other accessories.
Very robust, portable device for measuring the flow rate of gas chromatographs and for calibrating air sampling canisters. Measurement is performed in real time, allowing simultaneous flow and pressure measurement to improve validation efficiency. Reduces downtime.For real-time measurement of more than 30 common gases over a wide rangeCheck the volume flow, mass flow, pressure and temperature at the inlet and detector outlet of the GCFlow calibration with NIST-traceable accuracyImmediately ready for use after switching on, measurement completed within 20 secondsFast response time of 10 msTFT displayRS232 interface for data transfer18 hours battery lifeScope of supply: GC flow meter, hard-shell carrying case, spare tubings, tubing connector fittings, power supply with adapters for EU, UK, CH and USSpecificationsRange:0.1 ... 1000 ml/minAccuracy:±0.8 % of reading, 0.2 % of full scaleResolution:
Turn-down Ratio:0.1 ml/min
200:1Operating temperature:-10 ... 60 °CInlet pressure:max. 1000 kPa (145 psi)Dimensions:60 x 170 x 24 mmWeight:450 g
Convenient digital flow meter for the simple, accurate and repeatable measurement of flow in gas chromatographs. User friendly, handy design. Can be used with the carrier gases Air, Hydrogen, Nitrogen, Helium, Carbon dioxide, Argon and Argon/Methane. OLED display shows flow rate and further information. With pressure and temperature compensation. Suitable for columns with diameters of 100, 180, 200, 250, 320, 450, 530 and 750 µm.Measurement of flow rate, linear velocity and split ratioHigh resolution25 point calibration, traceable to National StandardsRechargeable batteryAuto power offScope of supply: Flow meter with case, tubings, tubing adapter fittings, tubing clips, tie-wraps, universal charger with USB connector, operation manual, calibration certificate.Please order adapters for direct connection to the detector separately.SpecificationsRange:0…500 ml/min. (0…300 ml CO2)Accuracy:0.4 ml/min. / ±2.5 %Resolution:0.1 ml/min.Operating temperature:15…35 °C, calibrated at 21±2 °CInlet pressure:max. 175 kPaDimensions:68 x 30 x 130 mmWeight:150 g
For the safe and continuous production of hydrogen with a purity of 99.9995% for GC and GC/MS.On-demand generation of high-purity hydrogen as detector gas for the FIDCompact, modular and stackable systemHydrogen production from deionised water using proton exchange membraneInternal leakage detection with automatic switch-off functionMinimal hydrogen storage in the systemFront LED touch screen with status displayCan be individually combined with PEAK zero nitrogen and zero air systemsSystems are available with different flow ratesVery low maintenance requirements3 years warranty on the hydrogen cellScope of supply: Hydrogen generator, 1 m Tygon® tubing, Deioniser column refill, barbed hose fitting, mains power cable for EU, UK and US, 2 x transit plugsSpecificationsPurity:99.9995 %Max. pressure:6.9 bar/100 psiRequired water quality:1.0 µS/cmGas connection:1/8" SwagelokPermissible ambient temperature:10 ... 35 °CDimensions (W x D x H):380 x 540 x 406 mmPower supply:110/230 V, 50/60 HzWarranty:3 years (cell) / 1 year (device)
Gas filters are an essential part of your GC analysis as contaminants in gases can significantly impact the quality of results. Oxygen, hydrocarbons and moisture can lead to problems such as noisy baselines, moisture entering the GC column and excessive bleed.Heavy-walled aluminium tubeHigh capacity filtersSintered stainless steel frits prevent particulate contaminationSpecificationsVolume:750 cm3Pessure rating:up to 17.2 bar