Sample bags SteriBag Premium, tamper-proof | Nominal capacity: 300 ml
CHF 260.00*
Content:
100
5 Available. Delivery time: 5-7 workdays
Product number:
9404126
Manufacturer:
Bürkle GmbH
Length:
260 mm
Width:
189 mm
Height:
80 mm
Weight:
0.495 kg
* Specifications refer to the packaging unit
The SteriBag Premium sample bags uniquely combine a high degree of security, sterility, tamper evident closure and traceability, they are used to securely transport and for the storage of samples. After sampling, the sample can be filled directly into the sterile sample bag. The tamper-evident closure seals the bag liquid-tight and secure. When trying to open the closure again, the word "STOP" appears clearly visible. Both the sample bag and the tear-off field are labeled with a unique tracking number, this allows complete documentation and traceability.
SteriBag Premium is suitable for many demanding applications in the food, pharmaceutical, medical area as well as in cleanroom or biotechnology sectors.
SteriBag Premium is suitable for many demanding applications in the food, pharmaceutical, medical area as well as in cleanroom or biotechnology sectors.
- Sterilised by gamma rays (10-6)
- With integrated tamper-proof closure for manipulation evidence
- Unique identification via tracking number
- Food-safe
| Dimensions (WxH): | 145 x 200 mm |
|---|---|
| Height: | 200 mm |
| Nominal capacity: | 300 ml |
| Sterile: | Yes |
| Width: | 145 mm |
| With labelling field: | Yes |
Similar products
Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications. Available with or without write-on label. With integrated wire closing system. Temperature range: -210 to 82 °C.
Transparent. For samples from chemistry, pharmaceutical, food technology applications etc.Sterile, RNase, DNase and pyrogen-freeLeakproofType A: Without write-on panelType B: With write-on panel.
Sterile, solid bags for the homogenisation of liquids and solidsWith and without labelling strips
Easy sample handling due to the specially gusseted bottom which flattens out when the sample is placed inside, allowing the bag to stand up on its own. It works just like a bottle or beaker, however it cost less, is shatterproof and uses a fraction of the storage space. The integrated wire closing system ensures the tightness of the sample bag. With write-on label for clean and easy identification. Temperature range: -210 to 82 °C.
Stand-up bag with bottom gussetAluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)Very good barrier properties against water vapor and oxygenOpaqueProtection against the influence of UV radiationTemperature range: -40 °C ... 90 °C
All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.
Transparent. For samples from chemistry, pharmaceutical, food technology applications etc. SteriBag StandUp stable and able to stand on its own without a separate stand or support, leaving both your hands free to take the sample and fill the bag.Sterile, RNase, DNase and pyrogen-freeLeakproof
Flat bag with open bottom, sealableAluminium composite film made of PET, SPE, AL, SPE and PE (5-layer structure)Opaque2 bags of 50 pieces
Whirl-Pak® bags are sterile polyethylene laboratory sample bags used to transport samples for biological testing and other applications.Temperature range -210 to 82 °C.Made of black pigmented PE-film providing maximum protection for samples that are sensitive to light.
All the bags use the same filter material. These special bags contain a third layer of finely perforated polyethylene, which filters out the solids in the sample when used in a homogeniser blender. This allows for easy pipetting of the sample. The hole diameter in the filter layer measures 0.33 mm and there are 285 holes per square cm. The filter is sealed into the perimeter of the bag on the sides and bottom, allowing the sample to be placed in the bag on either side. The liquid will transfer through the filter, but the solids stay on one side. With write-on lable. Temperature range: -210 to 82 °C.